---
title: "Ethernet Module Development Board with Xbee SD Slot"
url: "https://maker.wiznet.io/nagamma06/resellers/ethernet-module-development-board-with-xbee-sd-slot/"
markdown_url: "https://maker.wiznet.io/nagamma06/resellers/ethernet-module-development-board-with-xbee-sd-slot/md"
type: "VAR: Value-Added Reseller Products"
author: "thanksbuyercom@outlook.com"
author_url: "https://www.thanksbuyer.com/itead-w5100-ethernet-module-development-board-with-xbee-sd-slot-project-examples-for-arduino-42648"
editor: "WIZnet"
editor_url: "https://maker.wiznet.io/"
original_author: "thanksbuyercom@outlook.com"
original_url: "https://www.thanksbuyer.com/itead-w5100-ethernet-module-development-board-with-xbee-sd-slot-project-examples-for-arduino-42648"
published: "2022-08-29"
language: "en"
likes: 2
views: 1072
comments: 0
source: "WIZnet Makers (https://maker.wiznet.io/)"
---

# Ethernet Module Development Board with Xbee SD Slot

> itead W5100 Ethernet Module Development Board with Xbee SD Slot Project Examples for Arduino

Original author: thanksbuyercom@outlook.com (source: https://www.thanksbuyer.com/itead-w5100-ethernet-module-development-board-with-xbee-sd-slot-project-examples-for-arduino-42648)

## Article

IBoard is a master control for Arduino development board + W5100 Ethernet chip composed of the board but also with a lot of electronic building blocks interface, various types of electronic building block module can easily add ITEAD offer. With the XBee interface board, you can easily expand wireless capabilities.

### How To Use

A0 ~ A5 can also be used as a digital port , serial port can also be used as soft . A4 and A5 for the IIC bus , A4 is SCL, A5 is SDA.

**Steps:**
– For DIY, we will use these: IBoard main boars, nRF24L01+module, FOCA to seriel plate
– Other accessories : Mini USB cable X1,9V ~ 12V / 1A power adapter X1, networked cable X 1
– Step One: The nRF24L01 + module into a dedicated interface IBOARD MPU
– Step two: turn a string FOCA board into IBOARD the programming port side of the switch to 3.3v
PS: This FOCA turn itself comes reset pin serial board , firmware programming without manual operation. Can also be used as a base xbee serial communications
– Step four : Install the drivers for the hardware
1. Click ” My Computer” or “Computer “, open the “Administration”
2. Enter the ” Device Manager” , will appear in the port com “USB Serial Port”
3. Click on “USB Serial Port”, select “Update Driver Software”
4. Click the ” Browse my computer for driver software ”
5. Select your arduino IDE drivers directory under where , for example, my path is:D: arduino-1.0.4drivers
6. Click OK or Next to completeDriver Installation
– Step Five: IBOARD programming for firmware ( available free to modify the source code to implement the functions you want )
Libraries and demo Download:pan.baidu.com/s/1jGj09nS( Copied to the browser to download )
1. Unzip the downloaded library files to libraries directory of your arduino IDE folder inside
2. Open the arduino software , select Tools-> Serial Port-> COMX
3. COMX is in COM digital computer equipment manager FOCA ‘s
4. Select Tools-> Board->Arduino Duemilanove w / ATmega328
5. The gateway file ( available in Notepad to open ) inside the source code copied to the arduino program interface
6. In the code you will see APIKEY displayed as “xxxxxxxxxx”, this modification into your apikey ( in m.znck007.com registered account , enter the ” gateway ” to see )
7. Click on the left button on the first compilation , if the program is successfully compiled a second click on the download button to start downloading the program.
At this point, the gateway hardware and procedures have been completed .

Then , networking test:
1. Open the page using a mobile phone or pc intelligent control invasive passenger side m.znck007.com, and log in to your account
2. Click on ” home environment” and then click on the ” gateway status ” , if the current status is displayed Gateway is running , even to your account up .
You can also use a wireless module 433/315, xbee, zigbee , etc.

#### Seller Information

Seller Name : <https://www.thanksbuyer.com/>
Original Site: [itead W5100 Ethernet Module Development Board with Xbee SD Slot Project Examples for Arduino - Free Shipping - ThanksBuyer](https://www.thanksbuyer.com/itead-w5100-ethernet-module-development-board-with-xbee-sd-slot-project-examples-for-arduino-42648)

---

Source: https://maker.wiznet.io/nagamma06/resellers/ethernet-module-development-board-with-xbee-sd-slot/