---
title: "Arduino Water Flow with Web Server"
url: "https://maker.wiznet.io/nagamma06/projects/arduino-water-flow-with-web-server/"
markdown_url: "https://maker.wiznet.io/nagamma06/projects/arduino-water-flow-with-web-server/md"
type: "UCC: User Created Content"
author: "dirakit_indonesia"
author_url: "https://create.arduino.cc/projecthub/dirakit_indonesia/arduino-water-flow-with-web-server-f90216?ref=part&ref_id=31780&offset=79"
editor: "WIZnet"
editor_url: "https://maker.wiznet.io/"
original_author: "dirakit_indonesia"
original_url: "https://create.arduino.cc/projecthub/dirakit_indonesia/arduino-water-flow-with-web-server-f90216?ref=part&ref_id=31780&offset=79"
published: "2022-09-30"
language: "en"
hardware: ["Arduino UNO", "Arduino Ethernet Shield 2"]
likes: 3
views: 1265
comments: 1
source: "WIZnet Makers (https://maker.wiznet.io/)"
---

# Arduino Water Flow with Web Server

> This project was created to monitor the water coming out of the torrent

Original author: dirakit_indonesia (source: https://create.arduino.cc/projecthub/dirakit_indonesia/arduino-water-flow-with-web-server-f90216?ref=part&ref_id=31780&offset=79)

## Components

- **Arduino UNO** x 1 ([docs](https://www.farnell.com/datasheets/1682209.pdf))
- **Arduino Ethernet Shield 2** x 1 ([docs](https://docs.arduino.cc/hardware/ethernet-shield-rev2))

## Article

### This project is a big task of the Sensor-Based Programming (D3H3D4) course in the D3 Informatics Engineering study program, Faculty of Applied Sciences, Telkom University with lecturer Fat'hah Noor Pratwita, S.T., M.T. This project was made to monitor the water that comes out of the torrent, so that if the faucet does not turn on but the water runs out, the cause will be known, because there are often water torrent leaks that are of unknown cause.

### **Steps**

This project uses Arduino Uno and Arduino water shield.

- First of all provide the equipment ![](https://hackster.imgix.net/uploads/attachments/330584/201612154vvgekhkJLAA1S4e22wEjASYN8LZGb..bin?auto=compress%2Cformat&w=680&h=510&fit=max)![](https://hackster.imgix.net/uploads/attachments/330585/20161215GKUG0JjU7uv5doSYFqOZKNnsTmZucG..bin?auto=compress%2Cformat&w=680&h=510&fit=max)

- To test it, we only need to make a way for the water flow only, like this![](https://hackster.imgix.net/uploads/attachments/330608/20161215pgRRRLC2YfwHCLEB8HxkfTwBCTXZXG..bin?auto=compress%2Cformat&w=680&h=510&fit=max)

- Then, the water data will enter our device, like this:![](https://hackster.imgix.net/uploads/attachments/330617/20161215gap3XCQcMm0OOI3DhLNr9JUnVHiI2p..bin?auto=compress%2Cformat&w=680&h=510&fit=max)**Components used**

- Arduino Uno R3

- Ethernet Shield

- BeardBoard

- Cable Support

- Water Flow

---

Source: https://maker.wiznet.io/nagamma06/projects/arduino-water-flow-with-web-server/