---
title: "ProDino MKR Zero Ethernet V1"
url: "https://maker.wiznet.io/midnightcow/projects/ProDino-MKR-Zero-Ethernet-V1/"
markdown_url: "https://maker.wiznet.io/midnightcow/projects/ProDino-MKR-Zero-Ethernet-V1/md"
type: "UCC: User Created Content"
author: "midnightcow"
author_url: "https://maker.wiznet.io/midnightcow/"
original_author: "midnightcow"
original_url: "https://kmpelectronics.eu/products/prodino-mkr-zero-ethernet-v1/"
published: "2019-03-28"
language: "en"
hardware: ["ProDino MKR Zero Ethernet V1"]
likes: 0
views: 788
comments: 0
source: "WIZnet Makers (https://maker.wiznet.io/)"
---

# ProDino MKR Zero Ethernet V1

> ProDino MKR Zero Ethernet V1

Original author: midnightcow (source: https://kmpelectronics.eu/products/prodino-mkr-zero-ethernet-v1/)

## Components

- **ProDino MKR Zero Ethernet V1** x 1

## Article

## **Communication**

---

Are you developing projects for an environment where wireless connections are unavailable or would be inefficient? The ProDino MKR Zero Ethernet V1 allows you to have a wired **Ethernet** connection between your board and Internet. This is particularly important for projects that has to be installed in industrial environments with either electromagnetic noise or special safety requirements. It contains all futures on ProDino MKR Zero board plus Ethernet **W5500** chip.

![ProDino MKR Zero Ethernet V1 accent](https://kmpelectronics.eu/wp-content/uploads/2018/08/ProDino-MKR-Zero_8-Accent.jpg)

The ProDino MKR Zero Ethernet V1 has **4 relays**. The 4 Relays are a solution for driving high power loads that cannot be controlled by microcontroller’s digital IOs, due to the current and voltage limits of the controller. Each relay provides 2 pole changeover contacts (NO and NC). Relays are useful in switching on/off AC appliances like fan, light, motor or high current DC actuators like solenoid valve etc. Included four LEDs indicate the on/off state of each relay.

## **Getting started**

---

You can find in the [**Tutorial**](https://kmpelectronics.eu/tutorials-examples/prodino-mkr-versions-tutorial/) section all the information you need to configure your board, use the [**Arduino Software (IDE)**](https://www.arduino.cc/en/Main/Software), and start tinker with coding and electronics. What you can do with this board see in our **[Examples](https://kmpelectronics.eu/tutorials-examples/prodino-mkr-versions-examples/)**.

## **Features?**

---

- **ATSAMD21G18** Microprocessor, 32-Bit ARM Cortex® M0+

- **W5500** Ethernet chip

- **1 x GROVE**?connector

- **4 Relays?**Output

- **Pluggable** connectors

- **4 Optical** Isolated Inputs?

- **RS485 **port?

- **Switching** Regulators power supply

- **Arduino** MKR GSM1400 compatible

---

Source: https://maker.wiznet.io/midnightcow/projects/ProDino-MKR-Zero-Ethernet-V1/