---
title: "ProDino Ethernet Examples"
url: "https://maker.wiznet.io/midnightcow/projects/ProDino-Ethernet-Examples-by-midnightcow/"
markdown_url: "https://maker.wiznet.io/midnightcow/projects/ProDino-Ethernet-Examples-by-midnightcow/md"
type: "UCC: User Created Content"
author: "midnightcow"
author_url: "https://maker.wiznet.io/midnightcow/"
original_author: "midnightcow"
original_url: "https://kmpelectronics.eu/tutorials-examples/prodino-ethernet-examples/"
published: "2019-03-28"
language: "en"
hardware: ["ProDino Ethernet", "ProDino MKR Zero Ethernet", "ProDino MKR GSM Ethernet"]
likes: 0
views: 759
comments: 0
source: "WIZnet Makers (https://maker.wiznet.io/)"
---

# ProDino Ethernet Examples

> ProDino Ethernet Examples

Original author: midnightcow (source: https://kmpelectronics.eu/tutorials-examples/prodino-ethernet-examples/)

## Components

- **ProDino Ethernet** x 1
- **ProDino MKR Zero Ethernet** x 1
- **ProDino MKR GSM Ethernet** x 1

## Article

ProDino Ethernet examples suggest you how to use your board. The [board details...](https://kmpelectronics.eu/products/prodino-ethernet-v2/)

Table of Contents:

[How to start with examples](https://kmpelectronics.eu/tutorials-examples/prodino-ethernet-examples/#tab-con-10)

[Relays control through web page (WebRelay)](https://kmpelectronics.eu/tutorials-examples/prodino-ethernet-examples/#tab-con-4)

[Optical isolated inputs check (WebOptoInputs)](https://kmpelectronics.eu/tutorials-examples/prodino-ethernet-examples/#tab-con-11)

[One Wire temperature check (WebTemperature)?](https://kmpelectronics.eu/tutorials-examples/prodino-ethernet-examples/#tab-con-12)

[RS485 Test (WebRS485)](https://kmpelectronics.eu/tutorials-examples/prodino-ethernet-examples/#tab-con-7)

[RS485 HEX Test (WebRS485Hex)](https://kmpelectronics.eu/tutorials-examples/prodino-ethernet-examples/#tab-con-6)

[TCP relay control(TcpRelay)](https://kmpelectronics.eu/tutorials-examples/prodino-ethernet-examples/#tab-con-8)

[TCP Optical isolated inputs check (TcpOptoInput)](https://kmpelectronics.eu/tutorials-examples/prodino-ethernet-examples/#tab-con-2)

[UDP relay control(UdpRelay)](https://kmpelectronics.eu/tutorials-examples/prodino-ethernet-examples/#tab-con-1)

[UDP Optical isolated inputs check (UdpOptoInput)](https://kmpelectronics.eu/tutorials-examples/prodino-ethernet-examples/#tab-con-3)

[ProDino Internet Relay (projects/ProDinoIntRelay)](https://kmpelectronics.eu/tutorials-examples/prodino-ethernet-examples/#tab-con-5)

### **How to start with examplesFollowing next steps**

- If you don not install our library with examples,?[see here...](https://kmpelectronics.eu/tutorials-examples/prodino-ethernet-tutorial/#tab-con-5)

- In Arduino IDE selects File>Examples>KMPDinoEthernet>(example name)

- Click over the button "Verify"

- Press the button "Upload"

**Warning**: If your local network address is not in range 192.168.1.1 - 192.168.1.254, you should change?**_ip** address variable (in sketch) with free IP address from your network. An example: your network is: 192.168.0.x. You change IP address to 192.168.0.199. After you upload your sketch in ProDino Ethernet board, it will response from the new address.

---

Source: https://maker.wiznet.io/midnightcow/projects/ProDino-Ethernet-Examples-by-midnightcow/