---
title: "How to Use WIZnet-EVB-Pico2 in Arduino IDE"
url: "https://maker.wiznet.io/matthew/projects/how-to-use-wiznet-evb-pico2-in-arduino-ide/"
markdown_url: "https://maker.wiznet.io/matthew/projects/how-to-use-wiznet-evb-pico2-in-arduino-ide/md"
type: "WCC: WIZnet Created Content"
author: "matthew"
author_url: "https://maker.wiznet.io/matthew/"
original_author: "Matthew"
published: "2024-09-10"
language: "en"
likes: 0
views: 2811
comments: 2
source: "WIZnet Makers (https://maker.wiznet.io/)"
---

# How to Use WIZnet-EVB-Pico2 in Arduino IDE

> How to Use WIZnet-EVB-Pico2 in Arduino IDE

Original author: Matthew

## Article

## **Introduction**

Since the W5500-EVB-Pico2 is a Raspberry Pi PICO2 board with a WIZnet Ethernet Chip, you can use several development environments supported by the Raspberry Pi PICO2.
The Raspberry Pi PICO2 supports the Arduino IDE development environment, and the W5500-EVB-Pico2 can be used in the same way.
In this post, I will show you how to develop with the Arduino IDE environment using the very simple W5500-EVB-Pico2.

## Step 1.

Open up the Arduino IDE and go to File->Preferences.

In the dialog that pops up, enter the following URL in the "Additional Boards Manager URLs" field:

<https://github.com/earlephilhower/arduino-pico/releases/download/global/package_rp2040_index.json>

## Step 2.

Board -> Board Manager -> "pico" Search -> Earle F. Philhower, III install

## Step 3.

Select the board

Board -> Raspberry Pi RP2040(4.x.x) -> Select: Raspberry Pi Pico 2

## Step 4.

Blink Example

File -> Examples -> 01.Basics -> Select: Blink

## Step 5.

Upload

Set the Port, and upload.

If you don't see a Port, you don't need to specify one. It may be uploaded automatically.

Otherwise, you can connect in Boot mode (press the Reset Button and Power ON), set the Port, and upload.

---

Source: https://maker.wiznet.io/matthew/projects/how-to-use-wiznet-evb-pico2-in-arduino-ide/