---
title: "Have a Green Thumb with FlowerDuino"
url: "https://maker.wiznet.io/matthew/projects/Have-a-Green-Thumb-with-FlowerDuino/"
markdown_url: "https://maker.wiznet.io/matthew/projects/Have-a-Green-Thumb-with-FlowerDuino/md"
type: "UCC: User Created Content"
author: "matthew"
author_url: "https://maker.wiznet.io/matthew/"
original_author: "matthew"
original_url: "https://create.arduino.cc/projecthub/benjamin-notteghem/have-a-green-thumb-with-flowerduino-e5f46e?ref=part&ref_id=31780&offset=21"
published: "2019-04-02"
language: "en"
hardware: ["Arduino UNO & Genuino UNO", "LED", "DHT11 Temperature & Humidity Sensor(4pins)", "Arduino Ethernet Shield 2"]
likes: 0
views: 645
comments: 0
source: "WIZnet Makers (https://maker.wiznet.io/)"
---

# Have a Green Thumb with FlowerDuino

> Have a Green Thumb with FlowerDuino

Original author: matthew (source: https://create.arduino.cc/projecthub/benjamin-notteghem/have-a-green-thumb-with-flowerduino-e5f46e?ref=part&ref_id=31780&offset=21)

## Components

- **Arduino UNO & Genuino UNO** x 1
- **LED** x 1: Generic
- **DHT11 Temperature & Humidity Sensor(4pins)** x 1
- **Arduino Ethernet Shield 2** x 1 ([docs](https://docs.arduino.cc/hardware/ethernet-shield-rev2))
- Software: **myDevices Cayenne**: myDevices Cayenne ([docs](https://developers.mydevices.com/cayenne/docs/intro/))

## Documents and links

- [CODE](https://create.arduino.cc/projecthub/benjamin-notteghem/have-a-green-thumb-with-flowerduino-e5f46e?ref=part&ref_id=31780&offset=21#toc-configuration-7) (code)
- [Wiring_1_Cc8CdsGRbm](https://create.arduino.cc/projecthub/benjamin-notteghem/have-a-green-thumb-with-flowerduino-e5f46e?ref=part&ref_id=31780&offset=21#schematics) (schematics)

## Article

I made this IoT project with 2 tiny breadboards to minimize space. It's not perfect yet but?**I optimized the space as much as possible.**

- **Breadboard #1**?used to connect jumpers rather than in Arduino direct connection (inside my Arduino case)

- **Breadboard #2**?used to connect temperature and humidity sensor + brightness sensor + soil moisture sensor + LED. Put that in the ground and enjoy

---

Source: https://maker.wiznet.io/matthew/projects/Have-a-Green-Thumb-with-FlowerDuino/