---
title: "Remora-STM32F4xx-W5500"
url: "https://maker.wiznet.io/mason/projects/remora-stm32f4xx-w5500/"
markdown_url: "https://maker.wiznet.io/mason/projects/remora-stm32f4xx-w5500/md"
type: "UCC: User Created Content"
author: "Expatria-Technologies"
author_url: "https://github.com/Expatria-Technologies/Remora-STM32F4xx-W5500"
editor: "WIZnet"
editor_url: "https://maker.wiznet.io/"
original_author: "Expatria-Technologies"
original_url: "https://github.com/Expatria-Technologies/Remora-STM32F4xx-W5500"
published: "2024-01-29"
language: "en"
hardware: ["WIZnet W5500"]
likes: 0
views: 836
comments: 0
source: "WIZnet Makers (https://maker.wiznet.io/)"
---

# Remora-STM32F4xx-W5500

> Remora-STM32F4xx-W5500

Original author: Expatria-Technologies (source: https://github.com/Expatria-Technologies/Remora-STM32F4xx-W5500)

## Components

- **WIZnet W5500** x 1 ([docs](https://docs.wiznet.io/Product/Chip/Ethernet/W5500))

WIZnet parts: W5500 ([Datasheet](https://docs.wiznet.io/Product/Chip/Ethernet/W5500/datasheet?utm_source=maker&utm_medium=project&utm_campaign=w5500), [product hub](https://maker.wiznet.io/products/w5500/))

## Documents and links

- [Remora-STM32F4xx-W5500](https://github.com/Expatria-Technologies/Remora-STM32F4xx-W5500) (code)

## Article

Expatria Technologies has released the "Remora-STM32F4xx-W5500," a project that integrates STM32F4 microcontrollers with the W5500 Ethernet module. This project is designed for embedded systems and IoT applications, drawing inspiration from the Remora and GRBLHAL projects.

**Installation Guide1. Clone the Remora-NVEM Repository**: Use the following commands to clone and navigate to the Remora-NVEM repository:

bashCopy code

`git ``clone``https://github.com/Expatria-Technologies/Remora-NVEM.git ``cd``Remora-NVEM/LinuxCNC/Components/Remora-nv`

**2. Compile with Halcompile**: Compile the component using the command:

cssCopy code

`sudo halcompile ``--install``remora-nv``.c`

**3. Configuration Upload**: Use **upload_config.py** to upload your configuration file to FlexiHAL:

arduinoCopy code

`python3 upload_config.py FlexiHAL-config.txt`

**Dependencies**

The firmware is based on an unchanged version of the Remora-nv Ethernet and is tested with the Flexi-Pi LinuxCNC image.

---

Source: https://maker.wiznet.io/mason/projects/remora-stm32f4xx-w5500/