---
title: "RE> M5STACK LAN Module W5500 With POE"
url: "https://maker.wiznet.io/josephsr/resellers/re-m5stack-lan-module-w5500-with-poe-1/"
markdown_url: "https://maker.wiznet.io/josephsr/resellers/re-m5stack-lan-module-w5500-with-poe-1/md"
type: "VAR: Value-Added Reseller Products"
author: "@m5stack.com"
author_url: "https://maker.wiznet.io/teddy/resellers/M5STACK%2DLAN%2DModule%2DW5500%2DWith%2DPOE/?page=64&serob=rt&serterm=all"
editor: "WIZnet"
editor_url: "https://maker.wiznet.io/"
original_author: "@m5stack.com"
original_url: "https://maker.wiznet.io/teddy/resellers/M5STACK%2DLAN%2DModule%2DW5500%2DWith%2DPOE/?page=64&serob=rt&serterm=all"
published: "2024-07-02"
language: "en"
likes: 0
views: 663
comments: 0
source: "WIZnet Makers (https://maker.wiznet.io/)"
---

# RE> M5STACK LAN Module W5500 With POE

> Base PoE is an M5 Base that implements a W5500 Ethernet controller chip with PoE module.

Original author: @m5stack.com (source: https://maker.wiznet.io/teddy/resellers/M5STACK%2DLAN%2DModule%2DW5500%2DWith%2DPOE/?page=64&serob=rt&serterm=all)

## Article

## Description

**Base PoE** is an M5 Base that implements a W5500 Ethernet controller chip with PoE module, which provides Hardwired TCP/IP embedded Ethernet control to facilitate easier internet connection to embedded systems. W5500 integrates TCP/IP protocol stack, 10/100M Ethernet data link layer (MAC) and physical layer (PHY).This base supports RS485 / RS232 communication and can be used as an Ethernet to serial port server. It is specifically designed for industrial applications. PoE (Power over Ethernet) technology is supported. Through the built-in PoE module, power can be directly supplied to the base through PoE hub / switch without a separate power supply. It comes with a couple of HT3.96 connectors, metal rail and magnet discs for easy installation. The 6 pins of the HT3.96 connector are spare, you can wire them up with an RS485 or RS232 adapter board as you like.

This product is EOL now.

### Product Features

- Support PoE IEEE802.3 AF

- DC input supply voltage: 9-24V

- Ethernet access

- HT3.96 port for supporting RS485/RS232 communication

- 8 independent hardware socket simultaneous communication

- Support TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE protocols

- Support integrated 10BaseT / 100Base-T Ethernet PHY

- Easy to fixed on the wall

## Applications

- Ethernet controller

- Ethernet and RS485/RS232 data forwarding

- Ethernet network node

## Include

- 1x PoE Base

- 1x TTL-to-RS485 adapter board

- 1x TTL-to-RS232 adapter board

- 1x pin header 20pin

- 1x metal rails and magnet discs

- 3x HT3.96 terminal

- 2x 3pin

- 1x 4pin

- 10x cold crimp terminal（red Copper Lugs）

- 3x HEX KEY - 1x 1.5mm - 1x 2mm - 1x 2.5mm

- 2x hexagon socket head cap screws M3x28

- 4x hexagon socket tapping screw KA2x4

- 1x countersunk head screw M3x8

## Specification

| **Resources** | **Parameter** |
| --- | --- |
| Ethernet chip | W5500 |
| Support protocols | TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE |
| RS485 chip | SP3485EE |
| RS232 chip | MAX232 |
| PoE power supply mode | Idle network cable pin power supply(10M/100M Ethernet),J4&J5(VC-),J7&J8(VC+) |
| PoE specification | IEEE802.3 AF |
| DC input voltage | 9V~24V |
| Net weight | 32g |
| Gross weight | 132g |
| Product size | 54*54*28mm |
| Package Size | 105*65*40mm |

---

Source: https://maker.wiznet.io/josephsr/resellers/re-m5stack-lan-module-w5500-with-poe-1/