---
title: "How to implement ultra-compact Ethernet with WIZnet W5500 on Propeller"
url: "https://maker.wiznet.io/jakelee/projects/how-to-implement-ultra-compact-ethernet-with-wiznet-w5500-on-propeller/"
markdown_url: "https://maker.wiznet.io/jakelee/projects/how-to-implement-ultra-compact-ethernet-with-wiznet-w5500-on-propeller/md"
type: "UCC: User Created Content"
author: "Peter Jakacki"
author_url: "https://forums.parallax.com/discussion/157167/iot5500-p8-ethernet-server-lan-ant-ultra-compact-module"
editor: "WIZnet"
editor_url: "https://maker.wiznet.io/"
original_author: "Peter Jakacki"
original_url: "https://forums.parallax.com/discussion/157167/iot5500-p8-ethernet-server-lan-ant-ultra-compact-module"
published: "2026-02-19"
language: "en"
tags: ["W5500", "Propller"]
hardware: ["WIZnet W5500", "Parallax Propeller P1"]
likes: 0
views: 357
comments: 0
source: "WIZnet Makers (https://maker.wiznet.io/)"
---

# How to implement ultra-compact Ethernet with WIZnet W5500 on Propeller

> Deploy a standalone web/FTP server using IoT5500. This W5500-based module for Propeller offloads TCP/IP for high-speed, 80MHz SPI IoT networking.

Original author: Peter Jakacki (source: https://forums.parallax.com/discussion/157167/iot5500-p8-ethernet-server-lan-ant-ultra-compact-module)

## Components

- **WIZnet W5500** x 1 ([docs](https://docs.wiznet.io/Product/Chip/Ethernet/W5500))
- **Parallax Propeller P1** x 1

WIZnet parts: W5500 ([Datasheet](https://docs.wiznet.io/Product/Chip/Ethernet/W5500/datasheet?utm_source=maker&utm_medium=project&utm_campaign=w5500), [product hub](https://maker.wiznet.io/products/w5500/))

## Article

## Step 1: Understanding the Hardware

The IoT5500 is an ultra-compact networking module designed as a high-performance, footprint-compatible replacement for the WIZ820io. It utilizes the WIZnet W5500 Hardwired TCP/IP controller, which supports up to 8 independent sockets and features a 32KB internal buffer. The design allows for a "PCB sandwich" stack where an optional Propeller P1 (+P8) or Cortex M4 CPU is mounted directly over the Ethernet section, significantly reducing the physical footprint to roughly the size of an RJ45 MagJack.

Technical Specifications:

Interface: High-speed SPI (up to 80MHz supported by W5500).

Storage: Onboard 16Mbit serial Flash and microSD half-socket.

Clocking: 6MHz oscillator on the +P8 module (boosted to 96MHz system clock).

Communication: Serial command channel supporting up to 3M baud for host interaction.

## Step 2: Software/Firmware Setup

The module is optimized for the Tachyon Forth server software, which implements full HTTP, FTP, Telnet, and SNTP protocols. This setup allows the Propeller to act as a smart peripheral, handling the entire network stack and filesystem (FAT32) internally so that the host MCU’s memory remains free for applications.

C

```
// Conceptual integration example based on WIZnet ioLibrary (not project-specific)
// IoT5500 initialization typically handled via Tachyon Forth shell
wizchip_init(tx_size, rx_size); // Set 32KB buffer allocation across 8 sockets
wiz_set_ip(ip_addr);           // Configure static or DHCP-assigned address
```

## FAQ

Q1: Why use WIZnet W5500 instead of a software-based stack?
A: The W5500 features a Hardwired TCP/IP stack, which offloads protocol processing from the MCU. This saves approximately 30KB of RAM and significantly reduces CPU load, ensuring deterministic timing and stability for industrial IoT applications compared to software-based solutions like LwIP.

Q2: How is the W5500 connected to the host platform?
A: The IoT5500 uses a high-speed SPI interface (Mode 0 or 3) for data transfer. In the +P8 stack configuration, it also provides a serial command channel that allows a host MCU to control the network and filesystem via simple serial strings at speeds up to 3M baud.

Q3: What performance benefits does the W5500 offer?
A: It provides up to 10/100 Mbps Ethernet speeds with much higher effective throughput than earlier chips like the W5100. By using an 80MHz SPI clock and hardware-managed buffers, it eliminates jitter and handles bursty traffic efficiently without dropping packets.

Q4: Does this module provide security or stability advantages?
A: Yes, the hardwired logic gates handle the transport and network layers, making the system immune to common software-based network attacks like "Ping of Death." This deterministic hardware stack ensures that network activity does not interfere with time-critical local MCU tasks.

Q5: How does the IoT5500 compare to alternatives like the ENC28J60?
A: Unlike the ENC28J60, which only handles the MAC/PHY and requires the host to run a complex TCP/IP stack, the W5500 handles the entire stack in silicon. The IoT5500 is also significantly smaller and more integrated than standard WIZnet evaluation boards.

---

Source: https://maker.wiznet.io/jakelee/projects/how-to-implement-ultra-compact-ethernet-with-wiznet-w5500-on-propeller/