---
title: "Arduino Mega with Lanmisoft Arduino Control Center monitoring and resetting mining rigs"
url: "https://maker.wiznet.io/jaden/projects/arduino-mega-with-lanmisoft-arduino-control-center-monitoring-and-resetting-mining-rigs/"
markdown_url: "https://maker.wiznet.io/jaden/projects/arduino-mega-with-lanmisoft-arduino-control-center-monitoring-and-resetting-mining-rigs/md"
type: "UCC: User Created Content"
author: "LBi Guy"
author_url: "https://www.youtube.com/watch?v=8Ieu7YEAGwI&t=200s"
editor: "WIZnet"
editor_url: "https://maker.wiznet.io/"
original_author: "LBi Guy"
original_url: "https://www.youtube.com/watch?v=8Ieu7YEAGwI&t=200s"
published: "2023-02-01"
language: "en"
hardware: ["Arduino Ethernet Shield"]
likes: 3
views: 336
comments: 0
source: "WIZnet Makers (https://maker.wiznet.io/)"
---

# Arduino Mega with Lanmisoft Arduino Control Center monitoring and resetting mining rigs

> Arduino Mega with Lanmisoft Arduino Control Center monitoring and resetting mining rigs

Original author: LBi Guy (source: https://www.youtube.com/watch?v=8Ieu7YEAGwI&t=200s)

## Components

- **Arduino Ethernet Shield** x 1 ([docs](https://docs.arduino.cc/retired/shields/arduino-ethernet-shield-without-poe-module))

## Article

![](https://maker.wiznet.io/upload/ckeditor5/504422638%5F1675414838%2Epng)

This project is monitoring mining device and can reset them.

measured Temp, Humi, power supply's voltage and current consumption.

user can check these measured data through ACC(arduino control center).

![](https://maker.wiznet.io/upload/ckeditor5/504422638%5F1675415120%2Epng)

---

Source: https://maker.wiznet.io/jaden/projects/arduino-mega-with-lanmisoft-arduino-control-center-monitoring-and-resetting-mining-rigs/