---
title: "Create an LED electronic display controller using Wiz110sr"
url: "https://maker.wiznet.io/irina/resellers/create-an-led-electronic-display-controller-using-wiz110sr/"
markdown_url: "https://maker.wiznet.io/irina/resellers/create-an-led-electronic-display-controller-using-wiz110sr/md"
type: "VAR: Value-Added Reseller Products"
author: "다빛솔루션"
author_url: "https://dabitsol.com/?page_id=86"
editor: "WIZnet"
editor_url: "https://maker.wiznet.io/"
original_author: "다빛솔루션"
original_url: "https://dabitsol.com/?page_id=86"
published: "2024-01-19"
language: "en"
hardware: ["WIZnet WIZ110SR"]
likes: 0
views: 495
comments: 0
source: "WIZnet Makers (https://maker.wiznet.io/)"
---

# Create an LED electronic display controller using Wiz110sr

> Create an LED electronic display controller using Wiz110sr

Original author: 다빛솔루션 (source: https://dabitsol.com/?page_id=86)

## Components

- **WIZnet WIZ110SR** x 1 ([docs](https://docs.wiznet.io/Product/S2E-Module/WIZ110SR/))

## Documents and links

- [user manual](https://dabitsol.com/files/How%20to%20connect%20WIZ110SR%20converter%20to%20DABIT%20controller.pdf)

## Article

This document provides a step-by-step guide for hardware connections using an RJ45 cable and for configuring software settings through both the** WIZ110SR Configuration Tool** and Davit software. It outlines how to set the IP configuration, designate port numbers, and verify that communication between the signboard and PC is functioning properly.

![](https://maker.wiznet.io/upload/ckeditor5/916983524%5F1707138997%2Epng)

![](https://maker.wiznet.io/upload/ckeditor5/916983524%5F1707139159%2Epng)

While the LAN converter requires a separate DC5V power supply, connecting a 'power supply jumper wire' on the back of the LAN converter allows for direct power supply from the DABIT signboard controller through the DC5V terminal (red) of the RS232 cable.

![](https://maker.wiznet.io/upload/ckeditor5/916983524%5F1707139202%2Epng)

For detailed instructions, refer to the full manual.

---

Source: https://maker.wiznet.io/irina/resellers/create-an-led-electronic-display-controller-using-wiz110sr/