---
title: "TI RTOS driver for interfacing CC1310 CPU with W5500 ethernet chip"
url: "https://maker.wiznet.io/irina/projects/ti-rtos-driver-for-interfacing-cc1310-cpu-with-w5500-ethernet-chip/"
markdown_url: "https://maker.wiznet.io/irina/projects/ti-rtos-driver-for-interfacing-cc1310-cpu-with-w5500-ethernet-chip/md"
type: "UCC: User Created Content"
author: "Rufus31415"
author_url: "https://github.com/Rufus31415/W5500_CC1310_LAUNCHXL_tirtos_gcc"
editor: "WIZnet"
editor_url: "https://maker.wiznet.io/"
original_author: "Rufus31415"
original_url: "https://github.com/Rufus31415/W5500_CC1310_LAUNCHXL_tirtos_gcc"
license: "Apache License 2.0 (Apache-2.0)"
published: "2022-09-21"
language: "en"
hardware: ["Texas Instruments CC1310"]
likes: 8
views: 1765
comments: 1
source: "WIZnet Makers (https://maker.wiznet.io/)"
---

# TI RTOS driver for interfacing CC1310 CPU with W5500 ethernet chip

> This project is a based on the W5500 C++ Arduino library. IIt has been converted to C, so that it can be compiled for CC1310.

Original author: Rufus31415 (source: https://github.com/Rufus31415/W5500_CC1310_LAUNCHXL_tirtos_gcc)

## Components

- **Texas Instruments CC1310** x 1

## Documents and links

- [github](https://github.com/Rufus31415/W5500_CC1310_LAUNCHXL_tirtos_gcc) (code)

## Article

This project is a based on the W5500 C++ Arduino library (<https://github.com/Wiznet/WIZ_Ethernet_Library>). It has been converted to C, so that it can be compiled for CC1310.

This is a project for Code Composer Studio 7.2.0 (<http://www.ti.com/tool/CCSTUDIO>).

It runs on the real time operating system TI-RTOS (<http://www.ti.com/tool/TI-RTOS-MCU>).

[![Schema W5500 and CC1310](https://raw.githubusercontent.com/Rufus31415/W5500_CC1310_LAUNCHXL_tirtos_gcc/master/SCHEMATIC_TI_CC1310_W5500.png)](https://raw.githubusercontent.com/Rufus31415/W5500_CC1310_LAUNCHXL_tirtos_gcc/master/SCHEMATIC_TI_CC1310_W5500.png)

## **W5500 features**

- Supports Hardwired TCP/IP Protocols : TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE

- Supports 8 independent sockets simultaneously

- Supports Power down mode

- Supports Wake on LAN over UDP

- Supports High Speed Serial Peripheral Interface (SPI MODE 0, 3)

- Internal 32Kbytes Memory for TX/RXBuffers

- 10BaseT/100BaseTX Ethernet PHY embedded

- Supports Auto Negotiation (Full and half duplex, 10 and 100-based )

- 3.3V operation with 5V I/O signal tolerance

- LED outputs (Full/Half duplex, Link, Speed, Active)

- 48 Pin LQFP Lead-Free Package (7x7mm, 0.5mm pitch)

## **CC1310 features**

- Powerful Arm® Cortex® M3 Processor

- Ultra Low-Power Sensor Controller

- GPIO, SPI, UART, RTC, ADC, PWM

- Very low-power RF transceiver

---

Source: https://maker.wiznet.io/irina/projects/ti-rtos-driver-for-interfacing-cc1310-cpu-with-w5500-ethernet-chip/