--- title: "I2C Converter with Dual Serial to 16-Port Hardware I2C" url: "https://maker.wiznet.io/gonmei/resellers/I2C-Converter-with-Dual-Serial-to-16Port-Hardware-I2C/" markdown_url: "https://maker.wiznet.io/gonmei/resellers/I2C-Converter-with-Dual-Serial-to-16Port-Hardware-I2C/md" type: "VAR: Value-Added Reseller Products" author: "atul_efy" author_url: "https://maker.wiznet.io/atul_efy/" original_author: "gonmei" published: "2022-07-14" language: "en" likes: 0 views: 162 comments: 0 source: "WIZnet Makers (https://maker.wiznet.io/)" --- # I2C Converter with Dual Serial to 16-Port Hardware I2C > I2C Converter with Dual Serial to 16-Port Hardware I2C Original author: gonmei ## Documents and links - [Mechanical Drawing](http://maker.wiznet.io/uploads/2022/07/sc1-0.png) (schematics) - [Wiring Diagrams](http://maker.wiznet.io/uploads/2022/07/sc2-1.png) (schematics) - [I²C Interface](http://maker.wiznet.io/uploads/2022/07/sc3-2.png) (schematics) ## Article ### 900HP-S3B?Wireless?Compatibility Notes ***Notice: Compatibility Notes Does NOT Apply to the Following Products:*** - ***NCD Enterprise Solutions*** - ***NCD Wireless Sensors*** - ***NCD Enterprise Modems and Gateways**Notice: Compatibility Notes Applies to NCD Industrial Products, Including Fusion, ProXR, ProXR Lite, Taralist, and Reactor Series Products.**Compatibility Notes*** When using an 900HP-S3B?communication module, it is essential that you use the?[ZIGMO_PCB](https://store.ncd.io/product/modem-for-configuration-and-troubleshooting-of-wireless-modules/)?to configure the module settings.? Long-Range wireless sensors may be programmed over the air without removing the communications module. A?[900HP-S3B Modem](https://store.ncd.io/product/900hp-s3b-long-range-wireless-mesh-modem-with-usb-interface/)?or a gateway of some kind that support the 900HP-S3B communications module will also be required. ### Ethernet TCP/IP Compatibility Notes This device periodically sends UDP Packets on port 13,000, which help identify the IP address of this device on your network. ### I2C?Interface Compatibility NCD I2C Interface devices are designed to plug in to many popular IoT computing platforms. ?This allows the “brains” from other manufacturers to directly plug into our devices for easy plug-and-play operation. ?I2C interface devices use?I²C as the underlying communications technology. ?The notes below will guide you into?plugging 3rd party technologies into our devices, we will highlight any adapters that may be required in this section. ?Please note that all NCD I2C?Interface Devices can be chained together to any other?[Cross-Platform I²C Slave Devices](https://store.ncd.io/?fwp_platform=cross-platform)?using the I²C Output. ?Additionally, NCD I2C devices may be plugged into the I2C Output of?[NCD IoT Interface devices](https://store.ncd.io/?fwp_interface=iot-interface). ?A complete list?[NCD I2C Interface adapters is available by clicking here.](https://store.ncd.io/?fwp_product_type=i2c-adapters) ### Arduino Interface - Plug this device into the?[Arduino Micro I2C Shield](https://store.ncd.io/product/i2c-shield-for-arduino-micro-with-i2c-expansion-port/) - Plug this device into the?[Arduino Nano I2C Shield](https://store.ncd.io/product/i2c-shield-for-arduino-nano/) - Plug this device into the?[Arduino Uno I2C Shield](https://store.ncd.io/product/i2c-expansion-port-for-arduino-uno-platform/) - Plug this device into the?[Arduino Due I2C Shield](https://store.ncd.io/product/dual-i2c-shield-for-arduino-due-with-modular-communications-interface/) ### Banana Pi Interface - Plug this device into the?[Banana Pi I2C Shield](https://store.ncd.io/product/i2c-shield-for-banana-pi-with-outward-facing-i2c-port-terminates-over-hdmi-port/) ### BeagleBone Interface - Plug this device into a?[BeagleBone I2C Shield](https://store.ncd.io/product/i2c-shield-for-beaglebone-with-outward-facing-i2c-port/) ### Bluz Bluetooth Interface - Plug this device into the?[Bluz I2C Shield (with power)](https://store.ncd.io/product/screw-terminal-breakout-board-for-particle-photon-with-power-supply/) ### C.H.I.P.?Interface - Plug this device into the?[C.H.I.P. I2C Shield](https://store.ncd.io/product/i2c-shield-for-chip/) ### ESP8266 Interface - Plug this device into the?[NodeMCU ESP8266 I2C Shield](https://store.ncd.io/product/nodemcu-esp8266-i2c-shield-with-integrated-usb-and-i2c-port/) - Plug this device into the?[Adafruit Huzzah ESP8266 I2C Shield](https://store.ncd.io/product/adafruit-huzzah-esp8266-host-adapter-with-integrated-usb-and-i2c-expansion-port/) ### Particle Interface - Plug this device into a?[Particle Photon WiFi I2C Shield](https://store.ncd.io/?fwp_product_type=i2c-adapters&fwp_platform=photon) - Plug this device into a?[Particle Electron Cellular I2C Shield](https://store.ncd.io/?fwp_product_type=i2c-adapters&fwp_platform=electron) ### Onion Omega 1 & 2 Interface - Plug this device into a?[Onion Omega I2C Shield](https://store.ncd.io/?fwp_product_type=i2c-adapters&fwp_platform=onion-omega) ### PyCom Interface - Plug this device into a?[PyCom WiPy, WiPy2, and LoPy I2C Shield](https://store.ncd.io/?fwp_product_type=i2c-adapters&fwp_platform=pycom) ### Raspberry Pi Interface - Plug this device into a?[Raspberry Pi I²C Interface Adapter](https://store.ncd.io/?fwp_platform=raspberry-pi) - Plug this device into a?[Raspberry Pi 2/3 I²C Interface Adapter](https://store.ncd.io/?fwp_platform=raspberry-pi-2) - Plug this device into a?[Raspberry Pi Zero I²C Interface Adapter](https://store.ncd.io/?fwp_platform=raspberry-pi-zero) ### Windows 8/10?PC USB Interface - Plug this device into a??[USB to I2C Converter](https://store.ncd.io/product/usb-to-i2c-converter-with-virtual-com-port-ft230xs/) - Plug this device into the?[BridgeX5 Series Controller](https://store.ncd.io/product/dual-usb-to-5-port-i2c-bridge-adapter-100khz-for-anyi2c-software-windows-platform-ftdi-ft232rl/) ### RS-232 Serial Compatibility Notes The NCD RS-232 Serial communications module is compatible with standard RS-232 signals (+/-10VDC), which are not directly compatible with UART signals from a microprocessor. ?If you are working with Arduino, Microchip PIC, or other common microcontroller, a communications module is not required. ? Microcontrollers will directly talk to the on-board processor of all NCD controllers. ### RS-485 Serial Compatibility Notes The NCD RS-485 Serial communications module is compatible with NCD ProXR, ProXR Lite, Fusion, and Taralist series controllers. ?This module was designed to work with NCD devices, but may be used with devices outside the NCD family. ?This device acts as a transparent RS-485 to USART serial converter. ?Non-NCD products will require a software networking protocol to support multiple devices. --- Source: https://maker.wiznet.io/gonmei/resellers/I2C-Converter-with-Dual-Serial-to-16Port-Hardware-I2C/