2-way 10A relay controller/network relay Ethernet relay 2-way remote control switch smart home IP re
2-way 10A relay controller/network relay Ethernet relay 2-way remote control switch smart home IP relay can be developed again
WIZnet - W5500
x 1
2-channel 10A relay controller, with two-channel relay normally open output, without normally closed output, can be used for smart home control, and can be developed for secondary development using mobile phones or computers to remotely control lights, motors, and other electrical equipment. C++ source code is provided . Reliable network connection, the router can be restarted after the network is disconnected, the network connection can be restored reliably, and it can be remotely controlled across gateways. This product is powered by 5V.
Very simple control instructions
Send on1 to open the first relay, send off1 to close the first relay, and the second control method is the same. Send read1 to read the status of the first relay. If it returns on1, it means the first relay is closed, and if it returns off1, it means the first relay is released. Delay control is possible, for example, sending on1:02 means that the relay will be released after 2 seconds of closing, and sending on:12 means that the relay will be released after 12 seconds of closing. The maximum delay is 99 seconds.
Product use
It can be used for access control, computer control and remote control of electrical appliances. It can be controlled via external network or remotely via mobile phone.
Product Image
Very convenient setting interface
Provide C++ program, VS2010 project
Android mobile APP control (Apple’s does not have it)
