---
title: "C program"
url: "https://maker.wiznet.io/forum/9984"
markdown_url: "https://maker.wiznet.io/forum/9984/md"
type: "Forum topic"
category: "Ethernet Chips"
author: "sata"
created: "2014-02-25T14:47:32+09:00"
last_activity: "2017-05-04T08:31:37+09:00"
language: "en"
views: 418
replies: 1
source: "WIZnet Makers forum (https://maker.wiznet.io/forum/)"
---

# C program

## Question

Asked by sata on 2014-02-25 in Ethernet Chips.

hello every body.
i am new in wiznet.
i have a question?

i have a w5200 chip on my board connecting by spi.
i need a simple example(in c ) running on my board that can communicate with the chip.
setting ip,gateway,remote ip and sending some data.

thank.

## Replies

### Reply 1 by irinakim, 2014-02-25

Hi~

We support the firmware of W5200. our firmware is use the IAR program.
Please refer to as below.
W5200 Firmware : [url][http://www.wiznet.co.kr/Admin_Root/UpLoad_Files/BoardFiles/W5200E01-M3_Firmware_polling_v1.5.zip\[/url\]](http://www.wiznet.co.kr/Admin_Root/UpLoad_Files/BoardFiles/W5200E01-M3_Firmware_polling_v1.5.zip%5B/url%5D)

thanks, ![:slight_smile:](https://emoji.discourse-cdn.com/twitter/slight_smile.png?v=12)

---

Source: https://maker.wiznet.io/forum/9984