---
title: "How to use Serial Command to read DNS-IP?"
url: "https://maker.wiznet.io/forum/9886"
markdown_url: "https://maker.wiznet.io/forum/9886/md"
type: "Forum topic"
category: "Wireless"
author: "hardix"
created: "2014-02-03T12:19:25+09:00"
last_activity: "2017-05-04T08:31:20+09:00"
language: "en"
views: 461
replies: 3
source: "WIZnet Makers forum (https://maker.wiznet.io/forum/)"
---

# How to use Serial Command to read DNS-IP?

## Question

Asked by hardix on 2014-02-03 in Wireless.

Hi,

I use the DHCP-Client-mode and want to read the assigned DNS-IP.
How to use Serial Command to read DNS-IP?

## Replies

### Reply 1 by ssekim, 2014-02-11

Hello Hardix

Please try it again using or .

### Reply 2 by hardix, 2014-02-11

Hi,

The Command RI gives me the IP Addr and the Command RT gives me the WAN IP, SubMask and Gateway but no DNS-IP!?

### Reply 3 by ssekim, 2014-02-11

Hello Hardix

Please refer to the below logs.

[quote]
<S0_WIZnet_DIR636L_192.168.4.1>

<S1_192.168.4.107_255.255.255.0_192.168.4.1>
[/quote]

Maybe is what you want.

---

Source: https://maker.wiznet.io/forum/9886