---
title: "WIZ220IO Factory Setting"
url: "https://maker.wiznet.io/forum/9885"
markdown_url: "https://maker.wiznet.io/forum/9885/md"
type: "Forum topic"
category: "General"
author: "amar"
created: "2014-02-03T10:37:03+09:00"
last_activity: "2017-05-04T08:31:12+09:00"
language: "en"
views: 1107
replies: 1
source: "WIZnet Makers forum (https://maker.wiznet.io/forum/)"
---

# WIZ220IO Factory Setting

## Question

Asked by amar on 2014-02-03 in General.

What is the parameter that the factory sets to this module?
Such as IP address and Subnet mask of the module?

## Replies

### Reply 1 by amar, 2014-02-05

[quote=“midnightcow”]Hi,
WIZ220IO have factory reset as the below.

`uint8 code default_setting[EE_TOTAL - EE_IP1] = { 192, 168, 11, 2, // IP address 255, 255, 255,0, // Subnet Mask 192, 168, 11, 1, // Gateway address 0x13, 0x88, // local port 5000 0x00, 0x50, // http port 5000 192, 168, 11, 231, // server IP Address 0x13, 0x88, // server Port 0, //operation mode 0, 0, // delimeter time 0, // static IP 1, // debug HIGH(SW_VERSION), LOW(SW_VERSION), // version 0xfe, 8, 0, 1, 0, 1,1,1,1,1,1,1,1, // digital Input 0,0,0,0,0,0,0,0, // digital output 0x0f, 0xff, // analog input 0 0x0f, 0xff, // analog input 1 0,0, // analog output 0 0,0, // analog output 1 0 // Keep connection }; `[/quote]

thank you so much ![:slight_smile:](https://emoji.discourse-cdn.com/twitter/slight_smile.png?v=12) ![:slight_smile:](https://emoji.discourse-cdn.com/twitter/slight_smile.png?v=12) ![:slight_smile:](https://emoji.discourse-cdn.com/twitter/slight_smile.png?v=12)

---

Source: https://maker.wiznet.io/forum/9885