---
title: "Disable http-port while in command-mode"
url: "https://maker.wiznet.io/forum/9876"
markdown_url: "https://maker.wiznet.io/forum/9876/md"
type: "Forum topic"
category: "Wireless"
author: "hobbex"
created: "2014-01-30T15:49:57+09:00"
last_activity: "2017-05-04T08:31:08+09:00"
language: "en"
views: 451
replies: 2
source: "WIZnet Makers forum (https://maker.wiznet.io/forum/)"
---

# Disable http-port while in command-mode

## Question

Asked by hobbex on 2014-01-30 in Wireless.

Using wizfi210 in server mode and ad-hoc p2p connection to a PC.

When in command-mode (after issuing +++), i still recieve data from the client-browser. This interferes with the commands i send to the Wifi-module.

Can i disable the input from the connection/browser while in command-mode? I only want to listen on the http-port while in data-mode.

## Replies

### Reply 1 by hobbex, 2014-01-30

The data i get from the browser(?) is following:

“gzip,deflate,sdch”
Accept-Language: en-US,en;q=0.8,sv;q=0.6

### Reply 2 by ssekim, 2014-02-03

Hello Hobbex

There is no option to disable input from the connection.
So, you should parse and <commands/return>.

But, you had better issue “ATE0” command.
Refer to the below.

[quote]ATE
Format ATEn
n=0 (Input echo disable) ex) ATE0
n=1 (Input echo enable) ex) ATE1
[/quote]

---

Source: https://maker.wiznet.io/forum/9876