---
title: "Wifii and ethernet conectivity"
url: "https://maker.wiznet.io/forum/9810"
markdown_url: "https://maker.wiznet.io/forum/9810/md"
type: "Forum topic"
category: "Wireless"
author: "Lexxus"
created: "2014-01-13T18:44:20+09:00"
last_activity: "2017-05-04T08:31:01+09:00"
language: "en"
views: 472
replies: 3
source: "WIZnet Makers forum (https://maker.wiznet.io/forum/)"
---

# Wifii and ethernet conectivity

## Question

Asked by Lexxus on 2014-01-13 in Wireless.

Hi guys,

I was wondering if there are a couple of products that gives serial to ethernet /or to wifi, and share the same serial configuration commands, this is intended to developed a machine that could be wifi or ethernet with out a change in the MCU firmware.

Regards
RERG

## Replies

### Reply 1 by jbkim, 2014-01-15

Hi RERG,

We have serial to Ethernet module and serial to Wi-Fi module.
-. Serial to Ethernet
[url][http://www.wiznet.co.kr/sub_modules/en/product/Product_Line.asp?cate1=5&cate2=8\[/url\]](http://www.wiznet.co.kr/sub_modules/en/product/Product_Line.asp?cate1=5&cate2=8%5B/url%5D)
-. WiFi to Ethernet
[url][http://www.wiznet.co.kr/sub_modules/en/product/Product_Line.asp?cate1=5&cate2=43\[/url\]](http://www.wiznet.co.kr/sub_modules/en/product/Product_Line.asp?cate1=5&cate2=43%5B/url%5D)

However each module have different serial command.

Thanks,
JB

### Reply 2 by Lexxus, 2014-01-17

ok thanks, i was looking for one with the same serial commands in order to dont have to change firmware based on the hardware. do u think that wizfi630 could meet both requests?

### Reply 3 by jbkim, 2014-01-21

Sorry, Wizfi630 do not meet your requirements.

---

Source: https://maker.wiznet.io/forum/9810