---
title: "Unable to find wiz550sr in config tool 1.03"
url: "https://maker.wiznet.io/forum/16200"
markdown_url: "https://maker.wiznet.io/forum/16200/md"
type: "Forum topic"
category: "Serial-to-Ethernet & ConfigTool"
author: "Shyam"
created: "2026-11-18T22:14:04+09:00"
last_activity: "2026-11-19T16:35:11+09:00"
language: "en"
views: 2
replies: 3
source: "WIZnet Makers forum (https://maker.wiznet.io/forum/)"
---

# Unable to find wiz550sr in config tool 1.03

## Question

Asked by Shyam on 2026-11-18 in Serial-to-Ethernet & ConfigTool.

Hi Wiznet team,

Hope you are doing great!

I have a WIZ550SR on my custom board, this is the second board I am testing.

First board with the WIZ is working perfect.

On the second board, my link LED is successfully glowing with ACT LED blinking at irregular intervals. I am able to ping my wiz at ip - 192.168.77.100 but I am not able to find it in my config tool 1.03, when i hit search the result is blank ( no result )

I flashed the following firmware (App+Boot) using stlinkv2 with SWDIO,SWCLK pins

<https://docs.wiznet.io/Product/Modules/Serial-to-Ethernet-Module/WIZ550SR/download>

Config tool version: 1.03

WIZ550SR-->Router-->WIFI-->PC this is my setup

Firewall disabled as per sources. Can you please help me out what else could go wrong.

## Replies

### Reply 1 by Shyam, 2026-11-18

I am able to connect my old board having wiz550sr successfully, so i doubt it to be a firewall or virtualbox issue.

### Reply 2 by TheoIm, 2026-11-19

Hi,

Please download and try the latest WIZnet S2E Configuration Tool from the link below. The latest release supports WIZ550SR device discovery and configuration:

[https://github.com/Wiznet/WIZnet-S2E-Tool-GUI/releases](https://github.com/Wiznet/WIZnet-S2E-Tool-GUI/releases?utm_source=chatgpt.com)

Please run a search again with the PC and WIZ550SR connected to the same local network. If the device is still not listed, let us know and we can check the network discovery settings.

Best regards,
WIZnet Support

### Reply 3 by Shyam, 2026-11-19

Hi Theolm, thanks for getting back.

I have tried search with the latest wiznet tool 1.6.3. Search has failed ie no devices found. I have connected LAN cable directly to my laptop. My ping to 192.168.77.100 is successful. My LAPTOP IP is set to 192.168.77.101.

Both are on same subnet 192.168.77.1 and 255.255.255.0

---

Source: https://maker.wiznet.io/forum/16200
