---
title: "W6100 10BASE-T/100BASE-TX Compliance Testing"
url: "https://maker.wiznet.io/forum/16186"
markdown_url: "https://maker.wiznet.io/forum/16186/md"
type: "Forum topic"
category: "Ethernet Chips"
author: "ickampine"
created: "2026-10-27T01:24:07+09:00"
last_activity: "2026-10-27T09:06:30+09:00"
language: "en"
tags: ["W6100", "compliance", "10base-t", "100base-tx"]
views: 5
replies: 1
source: "WIZnet Makers forum (https://maker.wiznet.io/forum/)"
---

# W6100 10BASE-T/100BASE-TX Compliance Testing

## Question

Asked by ickampine on 2026-10-27 in Ethernet Chips.

Is there support for 10BASE-T and 100BASE-TX compliance waveforms in the W6100? The datasheet does not appear to contain any information on placing the W6100 into compliance test modes.

## Replies

### Reply 1 by Alan, 2026-10-27

Hello,

Even without using a compliance test mode, the W6100 should comfortably pass the compliance test if the hardware is designed correctly.

If you would like, you can send us your product and we can provide a compliance test report.

Are you asking how to configure a separate test mode?

---

Source: https://maker.wiznet.io/forum/16186
