---
title: "Herramienta de configuración/Configuration tool WIZnet S2E v1.6.2.15"
url: "https://maker.wiznet.io/forum/16175"
markdown_url: "https://maker.wiznet.io/forum/16175/md"
type: "Forum topic"
category: "Serial-to-Ethernet & ConfigTool"
author: "WiznetSis"
created: "2026-10-14T23:48:04+09:00"
last_activity: "2026-11-10T08:00:08+09:00"
language: "en"
views: 6
replies: 6
source: "WIZnet Makers forum (https://maker.wiznet.io/forum/)"
---

# Herramienta de configuración/Configuration tool WIZnet S2E v1.6.2.15

## Question

Asked by WiznetSis on 2026-10-14 in Serial-to-Ethernet & ConfigTool.

Actualice el modulo Wiz750SR a la version V1.4.5 (no el boot) con el programa de configuracion wizconfig. Todo funciono bien con la actualizacion.

![](https://maker.wiznet.io/upload/ckeditor5/dae4124dea274cbe92db0900a37174c4.png) original V1.2.4 paso a ser V1.4.5

I updated the Wiz750SR module to version V1.4.5 (not the bootloader) using the wizconfig configuration program. Everything worked fine with the update.

It allowed me to check out the new features on the web page.

Me permitio mirar lo nuevo en pagina WEB. ///

---

Existe Manual para esta aplicacion?
Toda la funcionalidad de herramientas como monitor, etc?

Is there a manual for this application?
Does it cover all the functionality of tools like the monitor, etc.?

![](https://maker.wiznet.io/upload/ckeditor5/af015993ab0d497c8f31362edc7f2950.png)

![](https://maker.wiznet.io/upload/ckeditor5/21bb5f79c7b24b6ebd19a5c15c23c604.png)

Todo bien hasta ese momento. Leer , Configurar etc.

pero cuando voy ahora al programa wizconfig_s2e_tool_1.6.2.15 ///

Everything was fine up to that point—reading, configuring, etc.

But now, when I go to the wizconfig_s2e_tool_1.6.2.15

![](https://maker.wiznet.io/upload/ckeditor5/b8e52531b91a400e8a98546d85c74ead.png)

Ya no puedo ver mas datos del modulo WIZ750SR y no me permite configurarlo mas. //

I can no longer see data from the WIZ750SR module, and it won't let me configure it anymore.

---

---

---

**solucionado **el tema de leer el dispositivo.

SE RESETEO A FABRICA Y VOLVIO A MIRAR PARA CONFIGURAR. AHORA ANDA.

NO TENGO GUIA MANUAL DEL PROGRAMA DE CONFIGURACION!!!

![](https://maker.wiznet.io/upload/ckeditor5/3d63be2436364d2386184e777da45566.jpg)

## Replies

### Reply 1 by TheoIm, 2026-10-15

Hello,

Thank you for your feedback.

The WIZ750SR firmware consists of two parts: **Boot and Application (App)**. These versions must be compatible for the module to operate properly.

You mentioned updating the firmware from v1.2.4 to v1.4.5. If your module still uses Boot v1.2, it is not compatible with App v1.4.5.

The WIZnet S2E Configuration Tool updates only the application area, so the Boot version remains unchanged.

**To resolve this compatibility issue, we recommend updating both Boot and App using the WIZISP Tool.**

### Firmware Update Instructions

Download the v1.4.5 Boot+App firmware from our GitHub releases page:

<https://github.com/Wiznet/WIZ750SR/releases>

File: `WIZ750SRv145_incl_Boot.bin` (for WIZ750SR-TTL/RS232/RS485)

Connect the WIZ750SR to your PC through UART2 (ISP port).

Run the WIZISP Tool, enter Boot mode, and upload the downloaded Boot+App firmware.

Once the update is complete, restart the module in Normal mode and verify its operation using the Configuration Tool.

For detailed instructions, please refer to our ISP Tool guide:

<https://docs.wiznet.io/Product/Modules/Serial-to-Ethernet-Module/WIZ750SR/developers-guide-EN#flash-programming-using-wizisp-tool>

**Note:** Please use the `Erase All Code Memory` option as described in the guide. Selecting `Erase All Data/Code Memory` may erase the MAC address and configuration data.

### Reply 2 by WiznetSis, 2026-11-04

![](https://maker.wiznet.io/upload/ckeditor5/ef0874d42a71482dbe4df92cafe1622d.png)

*Cual seria el mapeo de memoria en la version V1.4.5 ya que no esta en las paginas oficiales de informacion (https://github.com/Wiznet/WIZ750SR)? What is the memory mapping for version V1.4.5, given that it is not included on the official information pages (https://github.com/Wiznet/WIZ750SR)? Thanks.*

### Reply 3 by WiznetSis, 2026-11-05

El área AppBoot está diseñada para admitir la actualización del firmware y ocupa 0x000 a 0x6FFF (**parte inicial de 28 KB). SUPERIOR A v1.3 (V1.3.3, V1.4.5 etc)PREGUNTA : ![](https://maker.wiznet.io/upload/ckeditor5/90cc4f1923fd4a49ab9a52976effcd10.png) ROM2 SE PUEDE USAR lo que antes se usba en otras versiones ( 0xFF registros desde 0x7D00) ?Voy a hacer una aplicacion que podria usar eso que ya no se usa en la ROM2.**

---

**En las versiones ANTERIORES a la V1.3 y ahi se usaba . 0x7D00 (0xFF)![](https://maker.wiznet.io/upload/ckeditor5/c99c16babb4344b786547d9387ddef59.png) **

### Reply 4 by TheoIm, 2026-11-05 (in reply to reply 3)

Hello,

In WIZ750SR firmware v1.4.5, the memory range `0x00007D00–0x00007DFF` is reserved for fixed interrupt-handler code used by the Boot and App firmware.

Even if IROM2 is not shown as a separate memory region in the App target’s Keil settings, this does not mean that the address range is unused. The interrupt-handler code is placed there by the source and linker configuration.

Therefore, this region must not be overwritten with additional application code or data.

![](https://maker.wiznet.io/upload/ckeditor5/af4c64c3cd3949a7bc141e7ff93fdc77.jpg)

Please refer to the attached memory map for details.

To better understand your requirements, could you clarify how you intend to use this memory region?

- Are you planning to add executable code for new features?

- Or do you intend to store data such as configuration settings or logs?

If you briefly describe what you are trying to implement, we can suggest a suitable memory area and implementation approach.

Thank you.

### Reply 5 by WiznetSis, 2026-11-05

Thank you for such a quick response.
The idea is to add functionality to the boards for certain development projects, which requires optimizing the entire microcontroller. I have consistently used your boards for various pieces of equipment, and now I am building upon the W7500P (and your hardware designs).
I previously asked whether it was possible to solder an EEPROM—since it is missing from the WIZ750SR—or if there was a model that included one.
Once again, thank you very much, and congratulations on your modules; they are always excellent pieces of hardware.

### Reply 6 by TheoIm, 2026-11-10 (in reply to reply 5)

If you are wondering whether it can be replaced with another MCU or module that supports EEPROM implementation, please contact us at Theo@wiznet.io . I will answer.

---

Source: https://maker.wiznet.io/forum/16175
