---
title: "WizFi360 how to enter Standby mode"
url: "https://maker.wiznet.io/forum/15487"
markdown_url: "https://maker.wiznet.io/forum/15487/md"
type: "Forum topic"
category: "Wireless"
author: "Jackson0"
created: "2025-01-07T05:25:52+09:00"
last_activity: "2025-01-07T05:25:52+09:00"
language: "en"
views: 6
replies: 0
source: "WIZnet Makers forum (https://maker.wiznet.io/forum/)"
---

# WizFi360 how to enter Standby mode

## Question

Asked by Jackson0 on 2025-01-07 in Wireless.

Hello,

I don't understand how to enter the Wizfi360 Standby Mode, can somebody please explain how it works? The documentation is very bad.

I use Wizfi360 as AP and I would like to switch the module to permanent standby mode (maximum power saving), which remains until a high signal is received via the WP pin to wake up.

“AT+GSLP gives” ‘ERROR’ answer
“AT+GSLP=<time>” ( 1000-65535) only remains in standby for the set ms

“AT+SLEEP=<sleep mode>” 0-2 does not work either

How do I get the module into permanent standby?

Greetings
Michael

---

Source: https://maker.wiznet.io/forum/15487