---
title: "MicroPython for W5500-EVB-Pico2"
url: "https://maker.wiznet.io/forum/15339"
markdown_url: "https://maker.wiznet.io/forum/15339/md"
type: "Forum topic"
category: "MCU & Boards"
author: "Juergen"
created: "2024-10-28T21:42:11+09:00"
last_activity: "2025-06-27T13:10:25+09:00"
language: "en"
views: 16
replies: 8
source: "WIZnet Makers forum (https://maker.wiznet.io/forum/)"
---

# MicroPython for W5500-EVB-Pico2

## Question

Asked by Juergen on 2024-10-28 in MCU & Boards.

Hi all,
Is there a MicroPython version for W5500-EVB-Pico2 available?
Thanks and best regards,
Juergen

## Replies

### Reply 1 by sstaub, 2024-10-30

There is a file for pico2 at https://micropython.org/download/RPI_PICO2/

### Reply 2 by niclas, 2025-01-20

Still no MicroPython firmware. when will you release it?

(There is a CircuitPython firmware for W5100S-EVB-Pico2. https://circuitpython.org/board/wiznet_w5100s_evb_pico2/ )

### Reply 3 by cecilyen, 2025-01-22

There’s a pull request on MicroPython’s GitHub to add support for the W5500-EVB-Pico2 and W5100S-EVB-Pico2. Check it out here: https://github.com/micropython/micropython/pull/16280

### Reply 4 by Gruber, 2025-01-24

I've made a firmware, see thread: <https://maker.wiznet.io/forum/15529>

### Reply 5 by niclas, 2025-01-27 (in reply to reply 4)

Can't open thread. Says invalid subject.

I have build this <https://github.com/micropython/micropython/pull/16280> and done some initial testing and it seems to work.

### Reply 6 by TheoIm, 2025-02-05

Hi, The MicroPython project for Pico2 combined with our chip is currently under development, and the release schedule has not been determined yet.

Regards,

### Reply 7 by DAncingbear, 2025-06-27 (in reply to reply 6)

Is there any progress in a Micropython release? I have got all my basic functions working with Raspberry Pico2 but now I need to implement the network aspects. This was the reason for purchasing a W5500-EVB-Pico2

### Reply 8 by Grace_Koo, 2025-06-27 (in reply to reply 6)

Hello. There is a pull request currently in progress at the following link. Please take a look:
<https://github.com/micropython/micropython/pull/16280>

We are currently waiting for a response from the MicroPython team.
If you try it out and leave any feedback or a review, we would greatly appreciate it.

Thank you!

---

Source: https://maker.wiznet.io/forum/15339