---
title: "Assembling WizNet W6100-EVB-Pico2 and WizNet PoE-P1"
url: "https://maker.wiznet.io/forum/15327"
markdown_url: "https://maker.wiznet.io/forum/15327/md"
type: "Forum topic"
category: "MCU & Boards"
author: "LenzKappov"
created: "2024-10-23T22:30:22+09:00"
last_activity: "2024-10-27T21:53:20+09:00"
language: "en"
views: 7
replies: 1
source: "WIZnet Makers forum (https://maker.wiznet.io/forum/)"
---

# Assembling WizNet W6100-EVB-Pico2 and WizNet PoE-P1

## Question

Asked by LenzKappov on 2024-10-23 in MCU & Boards.

How can I connect a WizNet PoE-P1 to a WizNet W6100-EVB-Pico2?

Is there a right way and a wrong way?

Should the bank of pins labelled P1 on the PoE-P1 be towards the Ethernet connector or towars the USB socket?

## Replies

### Reply 1 by Juergen, 2024-10-27

Hi LenzKappov
I'm using a W5500-EVB-Pico2 with a WIZPoE-P1.
The right way to connect the WIZPoE-P1 to the board is:
- the 4 pins name VC1 (2 pins) and VC2 (2 pins) must be towards the Ethernet connector
- the 4 pins named OUT (2 pins) and GND (2 pins) must be towards the USB-C connector
Hope this answers your question.
BR
Juergen

---

Source: https://maker.wiznet.io/forum/15327