---
title: "Pinout diagram errors"
url: "https://maker.wiznet.io/forum/15284"
markdown_url: "https://maker.wiznet.io/forum/15284/md"
type: "Forum topic"
category: "IO Modules"
author: "bdempsey64"
created: "2019-05-28T15:30:33+09:00"
last_activity: "2019-05-30T02:06:58+09:00"
language: "en"
views: 665
replies: 1
source: "WIZnet Makers forum (https://maker.wiznet.io/forum/)"
---

# Pinout diagram errors

## Question

Asked by bdempsey64 on 2019-05-28 in IO Modules.

In this document: <https://wizwiki.net/wiki/lib/exe/fetch.php?media=products:wiz610io:wiz610io_user_manual_v1.0.pdf> on page 4 there is a pinout diagram of the WIZ610io module. It is incorrect. The pinouts in the Reference Schematic on page 14 look to be correct.

At the top of the page are 2 connector drawings. They are incorrect.
A little further down the page is a module graphic. It is incorrect as well. It does not match the connector drawing above it, and even if it did, that drawing is wrong.

Specifically:
J2 pin 1 is GND
J1 pin 3 is MOSI
J2 pin 6 is MISO

## Replies

### Reply 1 by scott, 2019-05-30

Oh thank you.

I’ll check it out and fix it.

Scott

---

Source: https://maker.wiznet.io/forum/15284