---
title: "Wiznet 5500 is identified but not pining"
url: "https://maker.wiznet.io/forum/15096"
markdown_url: "https://maker.wiznet.io/forum/15096/md"
type: "Forum topic"
category: "Ethernet Chips"
author: "Walid Boumediene"
created: "2023-12-15T20:30:45+09:00"
last_activity: "2023-12-17T09:11:57+09:00"
language: "en"
views: 167
replies: 1
source: "WIZnet Makers forum (https://maker.wiznet.io/forum/)"
---

# Wiznet 5500 is identified but not pining

## Question

Asked by Walid Boumediene on 2023-12-15 in Ethernet Chips.

I made a development card with wiznet 5500 and esp32 , When connecting the board with my laptop it reads the ethernet. from the wiznet site it’s said that the default address is 192.168.1.2 so i changed my laptop ip to 192.168.1.3 and when trying to ping it’s not working .
here’s the my wiznet 5500 schematics

[![image](https://maker.wiznet.io/forum_uploads/wiznet/original/2X/1/17ab538e509068896b45e251f7183aa08ca4c089.png) image1067×640 20.9 KB](https://maker.wiznet.io/forum_uploads/wiznet/original/2X/1/17ab538e509068896b45e251f7183aa08ca4c089.png)

## Replies

### Reply 1 by Eugeny, 2023-12-17

Hard to get what you mean. What is the current IP address of the W5500? What are its network mask and gateway IP address, and MAC address?

Walid_Boumediene:

> When connecting the board with my laptop it reads the ethernet.

What does this exactly mean?

---

Source: https://maker.wiznet.io/forum/15096