---
title: "OpenOCD configuration for WIZwiki-W7500P board ?"
url: "https://maker.wiznet.io/forum/14775"
markdown_url: "https://maker.wiznet.io/forum/14775/md"
type: "Forum topic"
category: "MCU & Boards"
author: "David Good"
created: "2023-01-14T19:40:57+09:00"
last_activity: "2025-05-24T21:57:28+09:00"
language: "en"
views: 318
replies: 3
source: "WIZnet Makers forum (https://maker.wiznet.io/forum/)"
---

# OpenOCD configuration for WIZwiki-W7500P board ?

## Question

Asked by David Good on 2023-01-14 in MCU & Boards.

Does anyone have an OpenOCD board configuration for the WIZwiki-W7500P ?

I have managed to get the basic GPIO toggling working with Eclipse / GCC / Linux and now want to get debug capability working before moving onto more complex projects .

Thanks !

–David

## Replies

### Reply 1 by David Good, 2023-02-01

Well ???

### Reply 2 by Matthew, 2023-02-07 (in reply to reply 1)

You can check it out at the link below.

[How to use the gcc in windows7 | WIZnet Document System](https://docs.wiznet.io/Product/iMCU/W7500/documents/appnote/how-to-use-gcc-for-w7500-peripherals-examples)
[How to use MDK for W7500 Peripherals Examples | WIZnet Document System](https://docs.wiznet.io/Product/iMCU/W7500/documents/appnote/how-to-use-mdk-for-w7500-peripherals-examples)
[How to make KEIL new project for W7500 | WIZnet Document System](https://docs.wiznet.io/Product/iMCU/W7500/documents/appnote/how-to-make-keil-new-project-for-w7500)

### Reply 3 by osmanyurdakul, 2025-05-24

Hi David,

Were you able to find out the solution to that? I've been looking for openocd target conf file for a while. :(

---

Source: https://maker.wiznet.io/forum/14775