---
title: "Are There Generic 3D Models Available for the W7500S2E-R1"
url: "https://maker.wiznet.io/forum/14635"
markdown_url: "https://maker.wiznet.io/forum/14635/md"
type: "Forum topic"
category: "Serial-to-Ethernet & ConfigTool"
author: "CurtinDevelopment"
created: "2022-09-05T06:17:57+09:00"
last_activity: "2022-09-05T23:32:13+09:00"
language: "en"
views: 307
replies: 1
source: "WIZnet Makers forum (https://maker.wiznet.io/forum/)"
---

# Are There Generic 3D Models Available for the W7500S2E-R1

## Question

Asked by CurtinDevelopment on 2022-09-05 in Serial-to-Ethernet & ConfigTool.

I am looking for a relatively generic 3d model for the W7500S2E-R1 for use by our Mechanical department to ensure it fits into an enclosure and the RJ45 connector is correctly positioned on the Box Does anyone have access to one of these

## Replies

### Reply 1 by lawrence, 2022-09-05

Hi [@CurtinDevelopment](https://maker.wiznet.io/u/curtindevelopment)

Could you send an email to support@wiznet.io ?

There is no info about it on official website. If you send email, I will check there is any openable data.

Thank you,

---

Source: https://maker.wiznet.io/forum/14635