---
title: "Read information by software via ethernet"
url: "https://maker.wiznet.io/forum/14634"
markdown_url: "https://maker.wiznet.io/forum/14634/md"
type: "Forum topic"
category: "Serial-to-Ethernet & ConfigTool"
author: "ryan lai"
created: "2022-09-02T02:18:44+09:00"
last_activity: "2022-09-09T05:48:10+09:00"
language: "en"
views: 348
replies: 3
source: "WIZnet Makers forum (https://maker.wiznet.io/forum/)"
---

# Read information by software via ethernet

## Question

Asked by ryan lai on 2022-09-02 in Serial-to-Ethernet & ConfigTool.

Hi All,
Our products build W7500S2E-S1 module in it and now we can easily read module information via Wiznet Config Tool.

Now our production has to test the functionality and our production auto-test tool may require the command to get IP address from module.
Is it possible that provide related network command to us ? (C#)

## Replies

### Reply 1 by ryan lai, 2022-09-07

Does anyone help on this ?

### Reply 2 by lokman402, 2022-09-08

[@ryan_lai](https://maker.wiznet.io/u/ryan_lai),

I’m Ron from WIZnet HK. Thank you for your question.

We have a configuration tool develop guide for our WIZSE series (W7500S2E series and W5500S2E series)

For detial information, please refer to the following attachments.
[S2E configuration tools develop guide.pdf](https://maker.wiznet.io/forum/legacyFile.asp?path=jXlTiGE2kvBVi66jRbCepkdX30e.pdf) (221.2 KB)
[S2E配置工具开发指导(修改).pdf](https://maker.wiznet.io/forum/legacyFile.asp?path=zK5OEBphaku3YhLOCZzpqesvoZv.pdf) (230.6 KB)

If you have any question about WIZSE series, please feel free to contact our HK office.

E-mail: support@wiznet.hk

Best Regards,
Ron

### Reply 3 by ryan lai, 2022-09-08

BTW, I can read the information so far by the guide with C#, thanks.

---

Source: https://maker.wiznet.io/forum/14634