---
title: "When would WIZ505SR-RP be available ?"
url: "https://maker.wiznet.io/forum/14620"
markdown_url: "https://maker.wiznet.io/forum/14620/md"
type: "Forum topic"
category: "Serial-to-Ethernet & ConfigTool"
author: "B Vincent"
created: "2022-08-22T15:33:21+09:00"
last_activity: "2022-11-09T17:18:29+09:00"
language: "en"
views: 309
replies: 2
source: "WIZnet Makers forum (https://maker.wiznet.io/forum/)"
---

# When would WIZ505SR-RP be available ?

## Question

Asked by B Vincent on 2022-08-22 in Serial-to-Ethernet & ConfigTool.

Below link says that WIZ505SR-RP (2 UART) is coming soon. Any date ?

[WIZ505SR-RP](https://www.wiznet.io/product-item/wiz505sr-rp/)

## Replies

### Reply 1 by Matthew, 2022-09-05

Currently, there are no plans to develop 2Port Serial to Ethernet Module.
When further development proceeds, we will reflect your opinion and suggest that the development plan be reflected.

### Reply 2 by B Vincent, 2022-11-09 (in reply to reply 1)

Hello,

I just received my WIZ505SR-RP.

In data-sheet here: [Datasheet | WIZnet Document System](https://docs.wiznet.io/Product/S2E-Module/WIZ5xxSR-RP-Series/WIZ505SR-RP/datasheet)
JUMPER J2 pins 2 and 4 are both VCC & pins 11 & 12 are GND.
pins 2 and 4 ========> connected to 3.3v
pins 11 and 12 ======> connected to GND
Above 3.3v source is taken from my main board.

**WIZ505SR-RP ======> MYBOARD wire connections**
pin 3(UART1-RX) =====> UART1 - TX
pin 7(UART1-TX) =====> UART1 - RX

This is my setup:

MYBOARD<===UART==> WIZ505SR-RP <==ETHERNET==> |PC|

Now, I did NOT update/change the firmware in WIZ505SR-RP. With the default settings on the WIZ505SR-RP, how can I see the text on my PC? Will any server (tcp) will be run by default?

---

Source: https://maker.wiznet.io/forum/14620