---
title: "wizphy_getphylink() not consist with LINKLED pin in W5500 sometimes"
url: "https://maker.wiznet.io/forum/14541"
markdown_url: "https://maker.wiznet.io/forum/14541/md"
type: "Forum topic"
category: "Ethernet Chips"
author: "tommyliu0804"
created: "2022-05-03T11:40:32+09:00"
last_activity: "2022-05-03T11:42:23+09:00"
language: "en"
views: 346
replies: 0
source: "WIZnet Makers forum (https://maker.wiznet.io/forum/)"
---

# wizphy_getphylink() not consist with LINKLED pin in W5500 sometimes

## Question

Asked by tommyliu0804 on 2022-05-03 in Ethernet Chips.

I try to monitor the link state in W5500 about every 5 seconds. Sometimes will get the OFF state but the cable is still plugged. So, I setup up a logic analyzer with trigger mode to monitor the LINKLED(pin 25) directly. The LINKLED still keep in LOW when I get the OFF state from register. Any suggestion?

---

Source: https://maker.wiznet.io/forum/14541