---
title: "Routing from incomming Ethernet Frames to sockets"
url: "https://maker.wiznet.io/forum/14243"
markdown_url: "https://maker.wiznet.io/forum/14243/md"
type: "Forum topic"
category: "Ethernet Chips"
author: "switzigmann"
created: "2021-05-17T10:48:55+09:00"
last_activity: "2021-05-20T07:35:25+09:00"
language: "en"
views: 318
replies: 1
source: "WIZnet Makers forum (https://maker.wiznet.io/forum/)"
---

# Routing from incomming Ethernet Frames to sockets

## Question

Asked by switzigmann on 2021-05-17 in Ethernet Chips.

Ich have a W5500 Chip.
Configured
Socket 0 as MACRAW with enable MAC Filtering
Socket 1 as UDP Port
Socket 2 as TCP/IP

Socket 0 should not receive Ethertype 0x0800
Whats the routing mechanism from the incomming Ethernet Frame to the sockets???
Is there any documentation?

## Replies

### Reply 1 by irina, 2021-05-20

This is an excerpt from the datasheet.
Please note.
![image](https://maker.wiznet.io/forum_uploads/wiznet/original/2X/b/bd00d8011d4c7b57de3c6e0cc924c2d08f40e05b.png)

---

Source: https://maker.wiznet.io/forum/14243