---
title: "Connection with ALFTP v5.31"
url: "https://maker.wiznet.io/forum/11079"
markdown_url: "https://maker.wiznet.io/forum/11079/md"
type: "Forum topic"
category: "General"
author: "Orko"
created: "2015-05-31T21:26:08+09:00"
last_activity: "2017-05-04T08:35:55+09:00"
language: "en"
views: 1071
replies: 6
source: "WIZnet Makers forum (https://maker.wiznet.io/forum/)"
---

# Connection with ALFTP v5.31

## Question

Asked by Orko on 2015-05-31 in General.

Hi, I 'm trying to connect the module WIZ550WEB (v1.0 ) using ALFTP ( v5.31 ) .
When connecting me for a password , which is the password ?

Leave blank and press the OK button not working.
See accompanying images .

Thanks,

Orko ![:nerd:](https://emoji.discourse-cdn.com/twitter/nerd.png?v=12)

[![](https://maker.wiznet.io/forum_uploads/wiznet/original/1X/ca06104f95486f5ba4a3efc0a10d1db558ceade3.jpg) 858×697 142 KB](https://maker.wiznet.io/forum_uploads/wiznet/original/1X/ca06104f95486f5ba4a3efc0a10d1db558ceade3.jpg)

[![](https://maker.wiznet.io/forum_uploads/wiznet/original/1X/ae4e6887240c5b8faead8ec24ceaa8dab3a84cd2.jpg) 858×698 153 KB](https://maker.wiznet.io/forum_uploads/wiznet/original/1X/ae4e6887240c5b8faead8ec24ceaa8dab3a84cd2.jpg)

## Replies

### Reply 1 by irina, 2015-06-02

Hi, Orko.
Is that a firmware version [v1.1.0 Develop]?
If so, please try to the ping test to WIZ550web module.

PC’s IP address should be settings as follows for network connection.

- Module : 192.168.11.100

- PC : 192.168.11.xxx (not 100)

Regards,
Eric.

### Reply 2 by romanyork, 2015-06-02

I’ve used
login = user
password = WIZnet
With the newer version of code.

### Reply 3 by Orko, 2015-06-03

[quote=“hkjung”]Hi, Orko.
Is that a firmware version [v1.1.0 Develop]?
If so, please try to the ping test to WIZ550web module.

PC’s IP address should be settings as follows for network connection.

- Module : 192.168.11.100

- PC : 192.168.11.xxx (not 100)

Regards,
Eric.[/quote]

Hi Eric,

unfortunately I have the version 1.0.1 .
I downloaded version 1.1.0 ( Develop ) , but I have not found compiled to upload (* .hex or * .bin ) files.
Please could you send these files?

Thank you.

Orko ![:nerd:](https://emoji.discourse-cdn.com/twitter/nerd.png?v=12)

### Reply 4 by Orko, 2015-06-03

[quote=“romanyork”]I’ve used
login = user
password = WIZnet
With the newer version of code.[/quote]

Hello romanyork ,

Unfortunately it did not work with this data.

Apparently the problem is caused by the firmware version .

regards

Orko ![:nerd:](https://emoji.discourse-cdn.com/twitter/nerd.png?v=12)

### Reply 5 by irina, 2015-06-09

Hi, Orko.
We uploaded binary of WIZ550web basic firmware version 1.1.0 develop on our GitHub repository.

Please refer to the following link:
[github.com/Wiznet/WIZ550web/releases/tag/v1.1.0](https://github.com/Wiznet/WIZ550web/releases/tag/v1.1.0)
You can find zip file; wiz550web_v1.1.0_develop.zip
Thanks.

Regards,
Eric.

### Reply 6 by Orko, 2015-06-10

[quote=“hkjung”]Hi, Orko.
We uploaded binary of WIZ550web basic firmware version 1.1.0 develop on our GitHub repository.

Please refer to the following link:
[github.com/Wiznet/WIZ550web/releases/tag/v1.1.0](https://github.com/Wiznet/WIZ550web/releases/tag/v1.1.0)
You can find zip file; wiz550web_v1.1.0_develop.zip
Thanks.

Regards,
Eric.[/quote]

Hi Eric,

Now everything works as expected . My problem has been solved.

thanks,

Orko ![:nerd:](https://emoji.discourse-cdn.com/twitter/nerd.png?v=12)

---

Source: https://maker.wiznet.io/forum/11079