---
title: "Writing a webpage to set IP addresses"
url: "https://maker.wiznet.io/forum/11061"
markdown_url: "https://maker.wiznet.io/forum/11061/md"
type: "Forum topic"
category: "Serial-to-Ethernet & ConfigTool"
author: "Mwood123"
created: "2015-05-22T17:19:18+09:00"
last_activity: "2019-03-05T09:59:33+09:00"
language: "en"
views: 731
replies: 2
source: "WIZnet Makers forum (https://maker.wiznet.io/forum/)"
---

# Writing a webpage to set IP addresses

## Question

Asked by Mwood123 on 2015-05-22 in Serial-to-Ethernet & ConfigTool.

We are currently using a WIZ105SR in a product and have a requirement to allow the user to set a static IP address for the product via an built-in web page. We have the local expertise to write the web page but do not have the knowledge of how to go about loading the address into the WIZ105SR. So I guess the question here is, where are these addresses in the board and what do we need to know in order to access them?

## Replies

### Reply 1 by jim, 2015-05-26

Dear Mwood123

Please read User Manual fully.
[old.wiznet.co.kr/sub_modules/en/ … F_KeyWord=](http://old.wiznet.co.kr/sub_modules/en/library/Download_View.asp?PK_Num=707&page=1&SF_Part=&SF_KeyWord=)

You can verify IP address by configuration tool.
And I think you must use “Serial Commands” to implement HTTP Server.
You can receive or send HTTP packet by using “Serial Commands”.

Thanks.

<P.S.>
I recommend WIZ550web solution.
WIZ550web FW is flexable and open platform.
[old.wiznet.co.kr/sub_modules/en/ … d=1243#tab](http://old.wiznet.co.kr/sub_modules/en/product/Product_Detail.asp?cate1=&cate2=&cate3=&pid=1243#tab)

### Reply 2 by livewire, 2019-03-05

Dear all,
could you kindly fix the download page for the “WIZ100/105/110SR S2E Programming Guide” because this can’t download the pdf and relink to a web page.
Also is this guide still valid or has it been exceeded by the WIZ100SR User Manual ?

Thank!
Livewire

---

Source: https://maker.wiznet.io/forum/11061