---
title: "Different Factory-Default Reset State"
url: "https://maker.wiznet.io/forum/10962"
markdown_url: "https://maker.wiznet.io/forum/10962/md"
type: "Forum topic"
category: "Wireless"
author: "SomeUser"
created: "2015-04-09T01:03:14+09:00"
last_activity: "2017-05-04T08:35:15+09:00"
language: "en"
views: 754
replies: 1
source: "WIZnet Makers forum (https://maker.wiznet.io/forum/)"
---

# Different Factory-Default Reset State

## Question

Asked by SomeUser on 2015-04-09 in Wireless.

The latest wizfi639 module I purchase (Jan 2015) have a factory default reset state with serial port #1 command mode H/W GPIO enabled
The last bach (April 2014) had a factory default reset state with serial port #1 command mode H/W GPIO disabled
How can I set both to be the same state for Factor-Default Reset ?

## Replies

### Reply 1 by SomeUser, 2015-04-10

Firmware version V1.1.28 Factory Resets to Command mode HW gpio disable
Firmware version V1.1.31 Factory Resets to Command mode HW gpio enabled

---

Source: https://maker.wiznet.io/forum/10962