--- title: "SSL example with certificate" url: "https://maker.wiznet.io/forum/10149" markdown_url: "https://maker.wiznet.io/forum/10149/md" type: "Forum topic" category: "Wireless" author: "ssekim" created: "2014-04-17T04:56:03+09:00" last_activity: "2017-05-04T08:32:27+09:00" language: "en" views: 581 replies: 0 source: "WIZnet Makers forum (https://maker.wiznet.io/forum/)" --- # SSL example with certificate ## Question Asked by ssekim on 2014-04-17 in Wireless. I like to show how to connect ssl server with certificate using WizFi210. Generally, to connect , you don’t need , and demand. As a example, to connect , you needwhich Apple issued to you. Anyway, here is a example about using WizFi210. Step1) Add Certificate File > AT+TCERTDEL=rootca > AT+TCERTDEL=usercert > AT+TCERTDEL=userkey > AT+TCERTADD=rootca,0,1273,0 > \[OK\] > OK > AT+TCERTADD=usercert,0,1413,0 > \[OK\] > OK > AT+TCERTADD=userkey,0,1191,0 > \[OK\] > OK Step2) AP Association and Set Time \[quote\]AT+WD \[OK\] AT+NDHCP=1 \[OK\] AT+WWPA=12345678 \[OK\] AT+WA=WizFiDemoAP IP SubNet Gateway 192.168.3.101: 255.255.255.0: 192.168.3.1 \[OK\] AT+SETTIME=04/09/2013,13:11:11 \[OK\] \[/quote\] Step3) SSL Connect \[quote\]AT+NCLOSEALL \[OK\] AT+NCTCP=17.172.xxx.xx,2195 \[CONNECT 0\] \[OK\] AT+SSLOPEN=0,rootca,usercert,userkey \[OK\] \[/quote\] About <AT+TCERTDEL>, <AT+TCERTADD> and <AT+SSLOPEN> refer to the WizFi210 Programmer’s Guide. About certificate file type and conversion, refer to the below site. Regards, Steve --- Source: https://maker.wiznet.io/forum/10149