---
title: "Turn On / Off Radio"
url: "https://maker.wiznet.io/forum/10006"
markdown_url: "https://maker.wiznet.io/forum/10006/md"
type: "Forum topic"
category: "Wireless"
author: "nils333"
created: "2014-03-04T08:55:15+09:00"
last_activity: "2017-05-04T08:31:45+09:00"
language: "en"
views: 598
replies: 2
source: "WIZnet Makers forum (https://maker.wiznet.io/forum/)"
---

# Turn On / Off Radio

## Question

Asked by nils333 on 2014-03-04 in Wireless.

Hi,

I have been given two serial commands in order to control the radio on/off state of the module as follows:

for radio off

for radio on

Both commands are being quit via ~~ by the module, but the Web-Page doesn`t show any change in state.~~

~~ ~~

Is the status changed and the update of the webpage missing or do I have to apply any other command in advance ?

## Replies

### Reply 1 by ssekim, 2014-03-04

Hello nils333

Please refer to the below.
After the below commands, you can see the applied new setting in web page.

- WiFi Off
  <OR iwpriv ra0 set RadioOn=0 && iwpriv ra0 set WlanLed=0>
  <ORnvram_set RadioOff 1>

- WiFI On
  <OR iwpriv ra0 set RadioOn=1 && iwpriv ra0 set WlanLed=1>
  <ORnvram_set RadioOff 0>

### Reply 2 by nils333, 2014-03-04

Hi,

yes thank you, that helped a lot.
Now it works

Best regards
Nils

---

Source: https://maker.wiznet.io/forum/10006