---
title: "M5Stack PoE CAM arduino example (image send)"
url: "https://maker.wiznet.io/daniel/projects/M5Stack-PoE-CAM-arduino-example-image-send/"
markdown_url: "https://maker.wiznet.io/daniel/projects/M5Stack-PoE-CAM-arduino-example-image-send/md"
type: "UCC: User Created Content"
author: "daniel"
author_url: "https://maker.wiznet.io/daniel/"
original_author: "daniel"
original_url: "https://github.com/m5stack/PoE_CAM/blob/master/examples/FACTORY_TEST/FACTORY_TEST.ino"
published: "2022-03-03"
language: "en"
hardware: ["M5Stack PoE Camera W/O Wi-Fi (OV2640)"]
likes: 0
views: 363
comments: 0
source: "WIZnet Makers (https://maker.wiznet.io/)"
---

# M5Stack PoE CAM arduino example (image send)

> M5Stack PoE CAM arduino example (image send)

Original author: daniel (source: https://github.com/m5stack/PoE_CAM/blob/master/examples/FACTORY_TEST/FACTORY_TEST.ino)

## Components

- **M5Stack PoE Camera W/O Wi-Fi (OV2640)** x 1: M5Stack PoE Camera W/O Wi-Fi (OV2640)
- Software: **arduino**

## Documents and links

- [source](https://github.com/m5stack/PoE_CAM/blob/master/examples/FACTORY_TEST/FACTORY_TEST.ino) (code)

## Article

## Description:

**PoECAM**?is an?`open source`?Fully?`programmable camera`?integrating?`PoE`?(Power Over Ethernet) . This item is?`ESP32`?based webcam with?`W5500`?embedded Ethernet controller plus?`200w pixel`?image sensor?`OV2640`. PoECAM?equipped?with a?combination?of?`8MB PSRAM`?+?`16MB Flash`?large memory. This?teeny?tiny with flexible power supply, you can get stable image by connecting the network cable in just 2 steps. It's wonderful for you to monitor warehouse, get auto image acquisition, etc.

The factory firmware of PoECAM will automatically obtain the IP after connecting to the switch and start the web server. By viewing the serial port output of PoECAM, you can get the IP address and the image stream URL, and you can preview the image in real time by visiting the URL with a browser under the same local area network.

---

Source: https://maker.wiznet.io/daniel/projects/M5Stack-PoE-CAM-arduino-example-image-send/