This project explains the connection between the Arduino and Wiz550io module. We will be able to know the status of the equipment even it is so far.
This IoT project explores how to connect Arduino to Ubidots and Android. One important aspect in Arduino Internet of things programmin is how to connect arduino to internet and store date to IoT cloud platforms using arduino ethernet shield. This aspect is important because it is possible to store data in the cloud and then analyze it. Once the data, like sensor values, is on the cloud is possible to access it using smart phones and control remotely the Arduino board.
we’ll cover how to get up and running with the SparkFun Ethernet Shield. Requirements, hardware, assembly, and programming will all be covered.
Tinovi ethernet board has total 8 analog/digital inputs accessible vai 4 connectors 2 inputs each and 5 relay outputs. It is based on ATMEGA644PA-AU MCU and WIZnet W5500 ethernet chip
This post introduces how to use WIZnet chip solution such like as W3100A, W5100, W5200, W5300, and W5500 with BASIC source code on BASCOM-AVR & BASCOM-8051.
BASCOM-AVR & BASCOM-8051 are BASIC complier & IDE development tools. These can implement with BASIC source code on WIZnet chip solutions.
If your Feather board is going to be part of a permanent installation, this Ethernet FeatherWing will let you add quick and easy wired Internet.
This poject is Sprinkler Water Saving Irrigation Controller for Residential Use. It is using Arduino Uno, W5500 Ethernet sheild(seeed v2), Real time clock module, moisture sensor, temperature&humidity sensor
This post describes how to create an Arduino data logger. Using Arduino data logger we want to send data retrieved from sensor to Xively IoT cloud platform. This platform very interesting and provides several features useful in building IoT projects.
The wireless module was driven by a voltage divider to drop the levels suitable for it. The value for R1 was 10K and R2 was 15K. The module plugs in a socket and next to socket are posts. I used the posts to wire up the Ethernet module.
This IoT project tutorial describes how to build an IoT project that monitors plant health status. We want to check some environment parameters like temperature, humidity and light intensity that have effects on the plant. Moreover, we want to retrieve the soil moisture.