---
title: "[TEUB Studio CDP] IOT 23 Ethernet - Modul IoT"
url: "https://maker.wiznet.io/bruno/projects/teub-studio-cdp-iot-23-ethernet-modul-iot/"
markdown_url: "https://maker.wiznet.io/bruno/projects/teub-studio-cdp-iot-23-ethernet-modul-iot/md"
type: "UCC: User Created Content"
author: "TEUB Studio CDP"
author_url: "https://www.youtube.com/watch?v=alOPPBLP5UA&ab_channel=TEUBStudioCDP"
editor: "WIZnet"
editor_url: "https://maker.wiznet.io/"
original_author: "TEUB Studio CDP"
original_url: "https://www.youtube.com/watch?v=alOPPBLP5UA&ab_channel=TEUBStudioCDP"
published: "2023-11-02"
language: "en"
hardware: ["Arduino Ethernet Shield"]
likes: 0
views: 291
comments: 0
source: "WIZnet Makers (https://maker.wiznet.io/)"
---

# [TEUB Studio CDP] IOT 23 Ethernet - Modul IoT

> Arduino Ethernet shieldAs part of the Ethernet Shield introduction content, we are also introducing the Arduino Ethernet Shield with the w5100 chip.

Original author: TEUB Studio CDP (source: https://www.youtube.com/watch?v=alOPPBLP5UA&ab_channel=TEUBStudioCDP)

## Components

- **Arduino Ethernet Shield** x 1 ([docs](https://docs.arduino.cc/retired/shields/arduino-ethernet-shield-without-poe-module))

## Article

This YouTube script explains Arduino and other devices related to the Ethernet module.

Arduino Ethernet Shield:

One of the Ethernet modules, which can be attached to Arduino and Genuino boards.
The board is equipped with an Ethernet terminal and a W5100 chip, allowing it to be connected to a computer network via an RJ 45 standard terminal.
It is also equipped with an SD card slot and reset button.
IMS Ethernet Module:

This module is for Ethernet communication via SPI interface and is based on IC ENC28J60.
Equipped with automatic polarity detection and correction.
Suitable for embedded servers, DHCP servers, and other Ethernet-based applications.
Ether Input Output 24:

This module can be used without any additional setup or programming.
It is immediately detected over Ethernet and each of the 24 input/output points can be monitored or switched.
Ideal for remote monitoring and control, allowing inputs and outputs to be monitored or switched from any network point. Access and control via the Internet is also possible.

This content describes various Ethernet modules and their uses, so it will be useful to those interested in Ethernet-based projects or Arduino-related projects.

---

Source: https://maker.wiznet.io/bruno/projects/teub-studio-cdp-iot-23-ethernet-modul-iot/