---
title: "Sending BMP180 Temperature Data To Thingspeak Using An Arduino Uno And Ethernet Shield"
url: "https://maker.wiznet.io/becky/projects/Sending-BMP180-Temperature-Data-To-Thingspeak-Using-An-Arduino-Uno-And-Ethernet-Shield/"
markdown_url: "https://maker.wiznet.io/becky/projects/Sending-BMP180-Temperature-Data-To-Thingspeak-Using-An-Arduino-Uno-And-Ethernet-Shield/md"
type: "UCC: User Created Content"
author: "becky"
author_url: "https://maker.wiznet.io/becky/"
original_author: "becky"
original_url: "http://www.iotlearning.net/code/arduino-code/sending-bmp180-temperature-data-thingspeak-using-arduino-uno-ethernet-shield.php"
published: "2019-03-28"
language: "en"
likes: 0
views: 1112
comments: 0
source: "WIZnet Makers (https://maker.wiznet.io/)"
---

# Sending BMP180 Temperature Data To Thingspeak Using An Arduino Uno And Ethernet Shield

> Sending BMP180 Temperature Data To Thingspeak Using An Arduino Uno And Ethernet Shield

Original author: becky (source: http://www.iotlearning.net/code/arduino-code/sending-bmp180-temperature-data-thingspeak-using-arduino-uno-ethernet-shield.php)

## Article

### Overview

In this posting we will take the BMP180, read the temperature and send this data to an online IoT platform, in this case we will use Thingspeak. To achieve this we will need an Arduino Uno with an Ethernet shield fitted and then we will connect the BMP180 sensor to this. Author covered the BMP180 a little in the?[Linkit One and BMP180 example](http://www.iotlearning.net/code/linkit-code/linkit-one-bmp180-example.php)?so focus on the thingspeak part and arduino code here

---

Source: https://maker.wiznet.io/becky/projects/Sending-BMP180-Temperature-Data-To-Thingspeak-Using-An-Arduino-Uno-And-Ethernet-Shield/