---
title: "NUCLEO-F030R8 W5500"
url: "https://maker.wiznet.io/austin/projects/nucleo-f030r8-w5500/"
markdown_url: "https://maker.wiznet.io/austin/projects/nucleo-f030r8-w5500/md"
type: "UCC: User Created Content"
author: "John Vedder"
author_url: "https://github.com/jvedder/nucleo_F030R8_w5500"
editor: "WIZnet"
editor_url: "https://maker.wiznet.io/"
original_author: "John Vedder"
original_url: "https://github.com/jvedder/nucleo_F030R8_w5500"
published: "2022-09-30"
language: "en"
hardware: ["WIZnet W5500"]
likes: 5
views: 5207
comments: 0
source: "WIZnet Makers (https://maker.wiznet.io/)"
---

# NUCLEO-F030R8 W5500

> Tinkering with WIZnet W5500 ethernet chip using an STM32F030R8 NUCLEO board.

Original author: John Vedder (source: https://github.com/jvedder/nucleo_F030R8_w5500)

## Components

- **WIZnet W5500** x 1 ([docs](https://docs.wiznet.io/Product/Chip/Ethernet/W5500))

WIZnet parts: W5500 ([Datasheet](https://docs.wiznet.io/Product/Chip/Ethernet/W5500/datasheet?utm_source=maker&utm_medium=project&utm_campaign=w5500), [product hub](https://maker.wiznet.io/products/w5500/))

## Documents and links

- [nucleo_F030R8_w5500](https://github.com/jvedder/nucleo_F030R8_w5500) (code)

## Article

### **WIZnet W5500 driver for STM32F030R8**

Tinkering with WinNet W5500 Ethernet Chip using an STM32F030R8 Nucleo Board

## **Requirements**

- "NUCLEO-F030R9" Developement Board from [ST Microelectronics](https://www.st.com/)

- Adafruit "Ethernet FeatherWing" [Item #3201](https://www.adafruit.com/product/3201)

- Eclipse CDT with "System Workbench for STM32" from [openstm32.org](https://www.openstm32.org/)

- Serial Port Terminal (PuTTY, TeraTerm or equivalent).

## **Setup**

- Connect FeatherWing GND to NUCLEO CN7 Pin 8 (GND)

- Connect FeatherWing 3V to NUCLEO CN7 Pin 12 (+3V3)

- Connect FeatherWing MOSI to NUCLEO CN10 Pin 26 (PB15)

- Connect FeatherWing MISO to NUCLEO CN10 Pin 28 (PB14)

- Connect FeatherWing SCK to NUCLEO CN10 Pin 26 (PB13)

- Connect FeatherWing CS to NUCLEO CN10 Pin 16 (PB12)

- ST-LINK serial port is set to 38400, 8N1

## **Usage**

- To be determined

## **License:**

- [MIT License](https://github.com/jvedder/nucleo_F030R8_w5500/blob/master/LICENSE.txt)

---

Source: https://maker.wiznet.io/austin/projects/nucleo-f030r8-w5500/