---
title: "Arduino Ethernet Shield 2 with microSD reader- A000024"
url: "https://maker.wiznet.io/annjaison/resellers/arduino-ethernet-shield-2-with-microsd-reader-a000024/"
markdown_url: "https://maker.wiznet.io/annjaison/resellers/arduino-ethernet-shield-2-with-microsd-reader-a000024/md"
type: "VAR: Value-Added Reseller Products"
author: "botland"
author_url: "https://botland.store/arduino-shield-communication/3926-arduino-ethernet-shield-2-with-microsd-reade"
editor: "WIZnet"
editor_url: "https://maker.wiznet.io/"
original_author: "botland"
original_url: "https://botland.store/arduino-shield-communication/3926-arduino-ethernet-shield-2-with-microsd-reade"
published: "2022-08-30"
language: "en"
likes: 2
views: 1912
comments: 1
source: "WIZnet Makers (https://maker.wiznet.io/)"
---

# Arduino Ethernet Shield 2 with microSD reader- A000024

> Shield for Arduino allows users to easily connect to the Ethernet network. Module based on W5500, it also has a microSD card slot

Original author: botland (source: https://botland.store/arduino-shield-communication/3926-arduino-ethernet-shield-2-with-microsd-reade)

## Article

The module is an extension for module [Arduino](https://botland.store/234-arduino) that connect to [Ethernet](https://botland.store/630-computer-networks) network. The service is simplified by the library together with intuitive documentation and numerous examples. Shield is also a reader of [microSD](https://botland.store/335-microsd-sd-cards) [memory cards](https://botland.store/335-microsd-sd-cards), which allows to store more data.

[![Arduino Ethernet Shield z czytnikiem kart microSD](https://cdn2.botland.store/img/art/inne/03926_3_2019b.jpg)](https://botland.store/img/art/inne/03926_3_2019.jpg)

**The subject of the sale is only the shield. **[**The Arduino Uno**](https://botland.store/234-arduino)** can be purchased separately in our store.**

## **Specification **

- Working voltage: 5 V (powered from [Arduino](https://botland.store/283-arduino-main-modules) pins)

- Ethernet controller: W5500 with buffer of 32 KB

- Data transfer rate: 10/100 MB

- Communication: SPI bus

- Built-in microSD memory card reader
  - Available from the level of a standard SD Card library
  - Pin SS of the SPI bus is at the pin no. 4

- Built-in RJ45 connector

- The possibility to connect the [module PoE](https://botland.store/2230-poe-power-module-12v.html)- power over Ethernet

- The module has the following status LEDs:
  - ON - signals the proper powering
  - LINK - indicates a connection to the network
  - FDX - indicates the connection in full duplex mode
  - 100M - indicates the communication with the speed of 100 Mbit/s
  - ACT - flashes when using pins RX and TX

- Led out RESET button of the Arduino

- Shield is compatible with [Arduino Uno](https://botland.store/1060-arduino-uno-rev3-module-a000066.html)and [Mega](https://botland.store/1062-arduino-mega-2560-rev3-module-a000067.html)(does not support Arduino Zero Pro M0)

[**![Arduino Ethernet Shield](https://cdn3.botland.store/img/art/inne/03926_4_2019b.jpg)**](https://botland.store/img/art/inne/03926_4_2019.jpg)

---

Source: https://maker.wiznet.io/annjaison/resellers/arduino-ethernet-shield-2-with-microsd-reader-a000024/