---
title: "To Control ITEAD Intelligent Switch via Ethernet"
url: "https://maker.wiznet.io/WIZnet/resellers/to-control-itead-intelligent-switch-via-ethernet/"
markdown_url: "https://maker.wiznet.io/WIZnet/resellers/to-control-itead-intelligent-switch-via-ethernet/md"
type: "VAR: Value-Added Reseller Products"
author: "iteadstudio"
author_url: "http://blog.iteadstudio.com/to-control-itead-intelligent-switch-via-ethernet/"
editor: "WIZnet"
editor_url: "https://maker.wiznet.io/"
original_author: "iteadstudio"
original_url: "http://blog.iteadstudio.com/to-control-itead-intelligent-switch-via-ethernet/"
published: "2023-04-26"
language: "en"
hardware: ["WIZnet W5100"]
likes: 0
views: 199
comments: 0
source: "WIZnet Makers (https://maker.wiznet.io/)"
---

# To Control ITEAD Intelligent Switch via Ethernet

> To Control ITEAD Intelligent Switch via Ethernet

Original author: iteadstudio (source: http://blog.iteadstudio.com/to-control-itead-intelligent-switch-via-ethernet/)

## Components

- **WIZnet W5100** x 1 ([docs](https://docs.wiznet.io/Product/Chip/Ethernet/W5100))

## Article

**DETAILS**

This application note explains how to make LED lighting controller simply using iboard which is made and provided by ITEAD Studio.

LED lighting controller consists of three main parts such as iboard as a main platform, ITEAD intelligent switch and 433Mhz transmitter module. If you want to control LED lighting in your house from remote side, firstly you have to create approprite command to control LED light and then send it to ITEAD intelligent switch through iboard. Finally, this command will be forwarded to 433Mhz transmitter module to communicate with target LED light.

iboard is using Atmega328P as main MCU and using W5100 for Ethernet connectivity.

You can understand LED light controller more easily when you refer the below link.

---

Source: https://maker.wiznet.io/WIZnet/resellers/to-control-itead-intelligent-switch-via-ethernet/