---
title: "SweetPea NetCat"
url: "https://maker.wiznet.io/WIZnet/resellers/sweetpea-netcat/"
markdown_url: "https://maker.wiznet.io/WIZnet/resellers/sweetpea-netcat/md"
type: "VAR: Value-Added Reseller Products"
author: "Sweetpeas"
author_url: "https://www.sweetpeas.se/modules/21-sweetpea-netcat.html"
editor: "WIZnet"
editor_url: "https://maker.wiznet.io/"
original_author: "Sweetpeas"
original_url: "https://www.sweetpeas.se/modules/21-sweetpea-netcat.html"
published: "2023-04-26"
language: "en"
hardware: ["WIZnet W5500"]
likes: 0
views: 151
comments: 0
source: "WIZnet Makers (https://maker.wiznet.io/)"
---

# SweetPea NetCat

> SweetPea NetCat

Original author: Sweetpeas (source: https://www.sweetpeas.se/modules/21-sweetpea-netcat.html)

## Components

- **WIZnet W5500** x 1 ([docs](https://docs.wiznet.io/Product/Chip/Ethernet/W5500))

WIZnet parts: W5500 ([Datasheet](https://docs.wiznet.io/Product/Chip/Ethernet/W5500/datasheet?utm_source=maker&utm_medium=project&utm_campaign=w5500), [product hub](https://maker.wiznet.io/products/w5500/))

## Article

**DETAILS**

This project is a new VAR product. It is a compact version of Network Module product using W5500.

**SweetPea NetCat**

Characteristics of the product extracted from the product homepage are described below.

> *The boards is equiped with a 3.3V power supply and the signals are 5V tolleran so it can be run directly from 5V systems such as Arduino or similar. It can also be fed with 3.3V externally allowing it to operate with pure 3.3V systems without any reconfiguration. The on board voltage regulator can feed up to 800mA and can be used to power other parts of your system. The W5500 still needs up to 250mA so be carefull when doing this.*
>
> *The module has an on board power LED to indicate that it is being powered. The activity and link LEDs are located on the connector and the two other LED’s (duplex and speed) can be accessed on the connector SV2.*

---

Source: https://maker.wiznet.io/WIZnet/resellers/sweetpea-netcat/