---
title: "Nano V3 Ethernet Shield – W5500 (V2)"
url: "https://maker.wiznet.io/WIZnet/resellers/nano-v3-ethernet-shield-%E2%80%93-w5500-v2/"
markdown_url: "https://maker.wiznet.io/WIZnet/resellers/nano-v3-ethernet-shield-%E2%80%93-w5500-v2/md"
type: "VAR: Value-Added Reseller Products"
author: "RobotDyn"
author_url: "https://robotdyn.com/nano-v3-ethernet-shield-w5500-v2.html"
editor: "WIZnet"
editor_url: "https://maker.wiznet.io/"
original_author: "RobotDyn"
original_url: "https://robotdyn.com/nano-v3-ethernet-shield-w5500-v2.html"
published: "2023-03-14"
language: "en"
likes: 3
views: 422
comments: 0
source: "WIZnet Makers (https://maker.wiznet.io/)"
---

# Nano V3 Ethernet Shield – W5500 (V2)

> Nano V3 Ethernet Shield – W5500 (V2)

Original author: RobotDyn (source: https://robotdyn.com/nano-v3-ethernet-shield-w5500-v2.html)

## Article

If you're looking to build a network-connected device with Arduino Nano is the best solution for you! Ethernet Shield W5500 features the Ethernet controller based on WizNet W5500 TCP/IP. WizNet W5500 is a TCP/IP embedded Ethernet controller. It provides TCP/IP Stack, 10BaseT/100BaseTX Ethernet with full or half-duplex, MAC and PHY. W5500 is using a highly efficient SPI protocol, with 80MHz clocks for high-speed connectivity to Arduino Nano. For lower energy consumption, W5500 provides WOL (Wake on LAN) and Power Off modes. ![](https://robotdyn.com/pub/media/catalog/product/cache/3c7e6817bfdaeedae5fc1f56c1800828/h/t/httpsrobotdyn.compubmediagr-00000022nanoethw5500-shieldphotophotobottomgr-00000022nanoethw5500-shield.jpg) ![](https://robotdyn.com/pub/media/catalog/product/cache/3c7e6817bfdaeedae5fc1f56c1800828/h/t/httpsrobotdyn.compubmediagr-00000022nanoethw5500-shieldphotophototopgr-00000022nanoethw5500-shield.jpg) **Arduino library:** Ethernet.h/Ethernet2.h/ Ethernet3.h

---

Source: https://maker.wiznet.io/WIZnet/resellers/nano-v3-ethernet-shield-%E2%80%93-w5500-v2/