---
title: "IBoard ATMega328 Arduino Compatible Board With WIZnet POE Ethernet Port For Home Automation Control"
url: "https://maker.wiznet.io/WIZnet/resellers/iboard-atmega328-arduino-compatible-board-with-wiznet-poe-ethernet-port-for-home-automation-control/"
markdown_url: "https://maker.wiznet.io/WIZnet/resellers/iboard-atmega328-arduino-compatible-board-with-wiznet-poe-ethernet-port-for-home-automation-control/md"
type: "VAR: Value-Added Reseller Products"
author: "iboard"
author_url: "https://www.autobotic.com.my/IBoard-ATMega328-Arduino-Compatible-Board-with-WIZnet-POE-Ethernet-Port-for-Home-Automation-Robot-Control"
editor: "WIZnet"
editor_url: "https://maker.wiznet.io/"
original_author: "iboard"
original_url: "https://www.autobotic.com.my/IBoard-ATMega328-Arduino-Compatible-Board-with-WIZnet-POE-Ethernet-Port-for-Home-Automation-Robot-Control"
published: "2023-03-14"
language: "en"
likes: 3
views: 242
comments: 0
source: "WIZnet Makers (https://maker.wiznet.io/)"
---

# IBoard ATMega328 Arduino Compatible Board With WIZnet POE Ethernet Port For Home Automation Control

> board is a unique board which features a WIZnet ethernet port, an XBee socket, nRF24L01+ module interface and an ATMega328.

Original author: iboard (source: https://www.autobotic.com.my/IBoard-ATMega328-Arduino-Compatible-Board-with-WIZnet-POE-Ethernet-Port-for-Home-Automation-Robot-Control)

## Article

introduction

Iboard can be used as an Ethernet, wireless communication [project](https://wiki.iteadstudio.com/Project) development platform. Iboard support POE (power on Ethernet) power supply, and Micro SD for mass storage. There are some 3pin electronic brick/ sensor brick interface breakout on board, it offer an easy way for a quick prototyping. You can setup a web server through which you may communicate with a remote Arduino using XBee radios, bluetooth or APC modules. This information can be posted to a web site, or to Twitter.

features

The onboard POE is pseudo POE, because the pin 4, 5, 7, 8 in 100M network cable is not being used. So we only use POE to power Ibaord. If you want to use the network cable to power, you can buy [injector](https://www.itead.cc/passive-power-over-ethernet-cable-injector.html) here. Or you can use DC7-23V to power.

![/uploads/2022/03/IBoard_2-300x206.jpg](https://maker.wiznet.io/uploads/2022/03/IBoard_2-300x206.jpg)

technical details

wiki : <https://wiki.iteadstudio.com/IBoard>

---

Source: https://maker.wiznet.io/WIZnet/resellers/iboard-atmega328-arduino-compatible-board-with-wiznet-poe-ethernet-port-for-home-automation-control/