---
title: "Programming the Arduino Ethernet Board"
url: "https://maker.wiznet.io/WIZnet/projects/programming-the-arduino-ethernet-board/"
markdown_url: "https://maker.wiznet.io/WIZnet/projects/programming-the-arduino-ethernet-board/md"
type: "UCC: User Created Content"
author: "WIZnet"
original_url: "https://gr33nonline.wordpress.com/2016/10/16/programming-the-arduino-ethernet-board/"
published: "2023-02-14"
language: "en"
likes: 2
views: 374
comments: 0
source: "WIZnet Makers (https://maker.wiznet.io/)"
---

# Programming the Arduino Ethernet Board

> .

Original source: https://gr33nonline.wordpress.com/2016/10/16/programming-the-arduino-ethernet-board/

## Article

The product page was obviously useless, [Arduino – ArduinoBoardEthernet](https://www.arduino.cc/en/Main/ArduinoBoardEthernet). It says that you can use the AVR pins (with an AVR programmer) or the serial pins (with a USB-FTDI adapter), but does not list which of the six serial pins is which. This is because one is meant to use a FTDI connector, which I do not have (see also [Getting started with an Arduino Ethernet board (not shield)](http://electronics.stackexchange.com/questions/55007/getting-started-with-an-arduino-ethernet-board-not-shield)).

---

Source: https://maker.wiznet.io/WIZnet/projects/programming-the-arduino-ethernet-board/