---
title: "A simple monitoring system with Arduino Ethernet"
url: "https://maker.wiznet.io/WIZnet/projects/a-simple-monitoring-system-with-arduino-ethernet/"
markdown_url: "https://maker.wiznet.io/WIZnet/projects/a-simple-monitoring-system-with-arduino-ethernet/md"
type: "UCC: User Created Content"
author: "Lorenzo Delana"
author_url: "https://github.com/devel0/iot-temp-sensors"
editor: "WIZnet"
editor_url: "https://maker.wiznet.io/"
original_author: "Lorenzo Delana"
original_url: "https://github.com/devel0/iot-temp-sensors"
published: "2023-04-03"
language: "en"
hardware: ["WIZnet W5500"]
likes: 0
views: 121
comments: 0
source: "WIZnet Makers (https://maker.wiznet.io/)"
---

# A simple monitoring system with Arduino Ethernet

> A simple monitoring system with Arduino Ethernet

Original author: Lorenzo Delana (source: https://github.com/devel0/iot-temp-sensors)

## Components

- **WIZnet W5500** x 1 ([docs](https://docs.wiznet.io/Product/Chip/Ethernet/W5500))

WIZnet parts: W5500 ([Datasheet](https://docs.wiznet.io/Product/Chip/Ethernet/W5500/datasheet?utm_source=maker&utm_medium=project&utm_campaign=w5500), [product hub](https://maker.wiznet.io/products/w5500/))

## Article

**DETAILS**

This is very simple & clean example for sending a sensor data.

The following figure shows the dashboard for the collected data.

![img](https://github.com/devel0/iot-temp-sensors/raw/master/doc/Selection_003.png)

For the source code and detail information about this, please visit [the original post](https://github.com/devel0/iot-temp-sensors).

Also, there is similar project on same GitHub repo. Enjoy them ?

- <https://github.com/devel0/iot-temp-sensors-sd-card>

- atmega328 + onewire ds18b20 + ethernet w5500 + sd card

---

Source: https://maker.wiznet.io/WIZnet/projects/a-simple-monitoring-system-with-arduino-ethernet/